SOURCE: 1999 k2500 4x4 5 speed started grinding only when
If it is noisy only in third, then third is where the problem is, cluster gear and/or mainshaft gear. Rule of thumb, if it is noisy in only one forward gear, then that gear is where the problem is.
SOURCE: 93 Chevy, gear shift **** between 2nd and 3rd
Remove the fluid - get a good flash light - get a very long screw driver - put the screw driver into the drain hole and force the transmission out of gear. Then remove the Transmission and replace or repair. Cheaper to replace. You bent the forks on the shift mechanism.
SOURCE: 1995 DODGE RAM 2500 4WD ENGAGEMENT PROBLEM!!!
You have vacumn lines the run to your transfer case and then to the vacumn motor on the front axle. you need to check the lines and connections. If vacumn is working fine, then motor on front axle is bad.
SOURCE: shift handle moves freely with out shifting trans
The shifter works off a shift cable which is connected to the transmission. The connection of this cable to the transmission is on the drivers side looking straight up were you can see it. The other end connects to the inner part of the shifting mechanisum where you shift
You can only get a replacement at any General Motos dealerships parts department
SOURCE: 1997 Saturn SL Series......My gearshift "broke
96 views
Usually answered in minutes!
×