-
Master
693 Answers
- Posted on Oct 09, 2011
Re: 1998 buick century only high beams and turn signals...
The Buick Century is equipped with a
multi-switch. This switch is an all in one switch that controls your
cruise control, windshield wipers and turn signals in one switch. This
switch also controls dimming and brightening of your headlights. The
dimmer switch is simple to replace, and all you need is a phillips head
screwdriver to complete the task.
-
Removing the Steering Column Shroud
-
Removing the dimmer switch starts at the steering column.
To plan this task out, access the steering column by removing the
screws holding the steering column shroud in place. This will expose the
turn signal lever. Remove the lever by twisting it forward, and pulling
it out of the switch.
Removing the Dimmer Switch
-
The switch is held on by two
screws and a wiring harness. The wiring harness can be removed by prying
up on the locking tabs and pulling the connector out of the socket. The
two screws can be removed with a phillips head screwdriver. The switch
will slide out. To install a dimmer switch, be sure to repeat these
steps in reverse order.
Can't find the relay switch for a 1995 century Buick where is it
×