Need to know where the timing marks are on a 2005 ford ranger with a 4.0 engine
Rotate the engine so that No. 1 cylinder is at TDC on the
compression stroke. Check that the timing marks are aligned on the
camshaft and crankshaft pulleys. An access plug is provided in the cam
belt cover so that the camshaft timing can be checked without removal of
the cover or any other parts. Set the crankshaft to TDC by aligning the
timing mark on the crank pulley with the TDC mark on the belt cover.
Look through the access hole in the belt cover to make sure that the
timing mark on the cam drive sprocket is lined up with the pointer on
the inner belt cover.
If you need further help, I’m available over the phone at https://www.6ya.com/expert/ernie_b93ee48ba0eab50b
1,560 views
Usually answered in minutes!
×