The fuel filter is located on the right inboard side of the unibody frame toward the rear portion of the vehicle but forward of the gas tank. You can either use a screw driver or a 8mm socket (depending on clamp). There will be a 10 mm bolt that holds the fuel filter to the unibody rail. Make sure when pulling the fuel line from the filter to hold a rag over the end of the filter you are removing the line from to prevent the excess fuel from spraying you and everything around you. For a beginner it will probably take you 20-30 minutes, but if you are mechanically inclined it should take around 10 minutes to complete the job. When the job is done and you are ready to start you Cherokee up cycle the ignition on and off a few times to build the fuel pressure back up and it should start right up. Hope this helps.
59 views
Usually answered in minutes!
×