I HAD DTC P0171 nd p0174 my truck is 1,500 5.7 engine can toy help me o n this one

Most are just misfires. Can you remove the spark plugs, clean and check the gap?

https://www.google.com/search?q=09+VW+touareg+P0353+P0174+P0300+P0302+P0303+P0430+P0171

P0300 - random misfire , P0171 & P0174 lean code's . All of this means you could have a bad vacuum leak ,low fuel pressure ,clogged fuel filter , Mass air flow sensor problem .
Ford 150 P0171 P0174 Trouble Codes vacuum leak water test
Low fuel pressure causing P0171 and P0174 trouble code

P0300 is a random miss fire , a vacuum leak can cause this as well as low fuel pressure ! weak fuel pump , clogged fuel filter !
DTC P0171: Fuel Trim System Lean Bank 1
DTC P0174: Fuel Trim System Lean Bank 2 These two codes are saying the PCM - engine computer is see a lean condition .
DTC P0191: Fuel Rail Pressure (FRP) Sensor Performance
Circuit/System Description
The fuel pressure sensor is located on the fuel line. The fuel pressure sensor monitors the fuel pressure in the fuel line. The fuel pump flow control module (FPCM) monitors the voltage signal from the fuel pressure sensor.

You don't say what make , model an year vehicle ! These are for GM vehicles , yours could mean something else . Except the first three , those are genaric codes , same for all makes ! So can't say what this codes are P2097, and P2099 ! Can't mean this P2097 - Post Catalyst Fuel Trim System Too Rich Bank 1
P2099 - Post Catalyst Fuel Trim System Too Rich Bank 2

2000 Toyota Corolla, P0171 & P0420 codes - YouTube

? 5:43
https://www.youtube.com/watch?v=ahJnJ19-vwY
Jun 13, 2011 - Uploaded by StandardBrandParts
Standard Motor Products presents: Technician's Toolbox "2000Toyota Corolla, P0171 & P0420 codes"

Smoke testing for codes P0171 P0174 - YouTube

? 5:48
https://www.youtube.com/watch?v=kZsqEfP-5zM
Jan 18, 2011 - Uploaded by realfixesrealfast
These two codes mean a V style engine is running lean on both banks. So you have to be thinking - what can ...

How to repair fault code P0171 and reset warning light ...

? 26:31
https://www.youtube.com/watch?v=Y8FBGrCT3rM
Nov 27, 2014 - Uploaded by Peter Finn
How to repair and fix fault or error code P0171 and reset warning light Toyota Corolla VVT-i engine. ... Also how to find fault codeusing OBD scanner. ... Trouble shooting a misfire, Code P0300, P0301, P0302, P0303, P0304, P0305, P0306, ... 2000 Toyota Corolla, P0171 & P0420 codes - Duration: 5:43. by ...

Sounds like you have a serious vacum leak.; DTC 0174 and 0174 are lean conditions on bank 1 and bank 2, 0300 is random misfire. The only thing I can think of is a big vacum leak like the brake booster / vac line leaking, or maybe the intake manifold is cracked ... even a stuck-open EGR doesn't normally lean a motor that much. Start by checking for a vacum leak, if the motor will idle you can spray a little WD-40 around ports and lines >> if the idle speeds up or becomes smooth you on the right track in the area you judt sprayed.

P0171 and P0174 are telling you that each cylinder bank is running too lean. P0300 is telling you there is a misfire, possibly caused by the other codes. This is why the engine is running rough.

Fuel Sys, Driveability, Filters (Air & Fuel)
2006 CHEVROLET COBALT

02/01/2006 ELIMINATION OF FUEL FILLER TUBE FLAPPER DOOR 03/01/2006 ERRATIC FUEL GAUGE READINGS 06/01/2006 USAGE OF E85 FUELS IN GM VEHICLES - REVISED 06/01/2006 L61 ENGINE MALFUNCTION INDICATOR LAMP (MIL)/SERVICE ENGINE SOON (SES) LAMP ILLUMINATED WITH DTC P0171 "FUEL TRIM SYSTEM LEAN" SET 07/01/2006 TOP TIER DETERGENT GASOLINE - DEPOSITS, FUEL ECONOMY, NO START, POWER, PERFORMANCE, STALL CONCERNS - REVISED 07/01/2006 USE OF E85 FUELS IN VEHICLES NOT CERTIFIED BY GM AS BEING FLEX FUEL COMPATIBLE / AFTERMARKET CONVERSIONS OF VEHICLES TO OPERATE ON E85 FUELS 09/01/2006 397.pdf&btitle=2006 CHEVROLET COBALT&yr=2006">GM FUEL SYSTEM TREATMENT PLUS, FUEL SENDING UNIT CORROSION AND FUEL SYSTEM DEPOSITS - REVISED 11/01/2006 940.pdf&btitle=2006 CHEVROLET COBALT&yr=2006">ERRATIC FUEL GAUGE READINGS - REVISED 03/01/2006 USAGE OF E85 FUELS IN GM VEHICLES - REVISED 12/01/2006 TOP TIER DETERGENT GASOLINE - DEPOSITS, FUEL ECONOMY, NO START, POWER, PERFORMANCE, STALL CONCERNS - REVISED 01/01/2007 EMISSION RECALL - ENGINE FUEL INJECTORS - REPLACE 01/01/2007 LSJ, L61, LK5, L52, LL8 ENGINE - REDUCED ENGINE POWER, MIL/SES LIGHT, DTC P1516, P2135, P2138 02/01/2007 MULTIPLE DRIVEABILITY SYMPTOMS DUE TO CLOGGED FUEL INJECTORS, MIL/SES DTCS P0171, P0172, P0174, P0300, P1174, P1175 - REVISED 03/01/2007 MULTIPLE DRIVEABILITY SYMPTOMS DUE TO CLOGGED FUEL INJECTORS, MIL/SES DTCS P0171, P0172, P0174, P0300, P1174, P1175 - REVISED 05/01/2007 MULTIPLE DRIVEABILITY SYMPTOMS DUE TO CLOGGED FUEL INJECTORS, MIL/SES DTCS P0171, P0172, P0174, P0300, P1174, P1175 - REVISED 06/01/2007 <A href="http://arrc.epnet.com/autoasp/data.asp?sid=122357497&uid=s9193090.remote.autorefctr&type=pdf&ff=082000

P0171------ system too lean bank#1
Po174------ system too lean bank#2
For these 2 codes, try cleaning the maf sensor (mass air flow), that is mounted in the big black hose that goes from the air filter housing to the throttle plate, if it is dirty, that will cause those 02 sensors to send a signal to the computor to lean the air fuel mixture. If cleaning it doesn't work, the sensors will probably need changing.
P0300---- Random/multiple cylinder misfire
P0316---- Cylinder misfire at start up---- first 100 revolutions.
On those 2 codes, you have to do some testing to find out why there is a misfire.
Possible causes:
dirty/malfunctioning injectors
weak coil pack
fowling spark plugs/wires
Low fuel pressure

DTC Number
P0160 DTC Name O2 Sensor Circuit No Activity Detected Bank 2 Sensor DTC Number P0300 DTC Name Random/Multiple Cylinder Misfire Detected

Subject: 97-05 Vehicles with 4.8 5.3 5.7 and 6.0 Gen III V8 Engines and Misfires on One Bank - kw CEL diagnostics driveability DTC P0171 P0172 P0174 P0175 P0300 P0301 P0302 P0303 P0304 P0305 P0306 P0307 P0308 #PIP3056 - (07/12/2004)

Models: (00-05 Cadillac Escalade - C6 and K6) and (02-05 Chevrolet Avalanche - C1, C2 K1 and K2) and (99-05 Chevrolet Silverado - C1, C2 K1 and K2) and (00-05 Chevrolet Suburban - C1, C2, K1 and K2) and (00-05 Chevrolet Tahoe - C1 and K1) and (99-05 GMC Sierra C1, C2 K1 and K2) and (00-05 GMC Yukon - C1, C2, K1 and K2) and (03-05 Chevrolet Express G1, G2, G3, H1, H2 ) and (03-05 GMC Savana G1, G2, G3, H1, H2 ) and (04-05 Buick Rainier S1, T1 ) and (03-05 Chevrolet Trail Blazer EXT S1, T1 ) and (03-05 GMC Envoy XL XUV S1, T1 ) and (03-05 Hummer H2) and (04-05 Cadillac CTS-V DB) and (98-02 Chevrolet Camaro FB) and (97-04 Chevrolet Corvette YB) and (98-02 Pontiac Firebird FB) and (04-05 Pontiac GTO VB)

The following diagnosis might be helpful if the vehicle exhibits the described symptoms.

Condition/Concern:
Check Engine Light with a P0300 due to 2 - 4 cylinders misfiring on the same bank of the engine. DTCs P0171, P0172, P0174 or P0175 may also set for the misfiring bank.

Recommendation/Instructions:
If the published misfire diagnostic does not isolate the cause, perform the following suggestions as necessary:

• Perform a fuel injector balance test for all 8 cylinders. If a fuel injector concern exists, it is possible to misfuel an entire bank of the engine, causing multiple cylinders on the same bank to misfire even though the root cause is a single fuel injector.
• Inspect O2 sensor connections on the misfiring bank for corrosion or water intrusion. If water intrusion is found on the right bank, it may be due to the AC Evaporator Condensation dripping onto the O2 sensor harness. If this condition is found, reposition and shield the harness to prevent a repeat concern and repair the connections.
• Check for excessive exhaust backpressure using the restricted exhaust diagnosis.
• Swap the Position 1 O2 sensors side to side to see if the misfires move to the other bank of the engine. If so, replace the O2 sensor.

Please follow this diagnosis process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.

NOTE: GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your vehicle will have that condition.