Hi,
I apologize for a delayed response as i was not at my desk.
Check to see if the fuel pump relay clicks when you turn the key on. If
it doesnt click verify one terminal has constant ground if not you will
need to run a new ground wire. If ground is good access pin 46 on
connector 1 of the pcm to check for voltage if no voltage replace pcm if
it has voltage replace green/white wire between pcm and relay. You can
also first try to swap the relay with another one to see if that helps.
If relay clicks then check the 15 amp fuel pump fuse and if blown
replace. If fuse is good verify one terminal on the relay has voltage
at all times and gray wire has voltage leaving relay when key is in
crank position for for a few seconds when turned into on position. If
gray wire leaving relay has voltage but not gray wire at fuel pump
replace the wire.
Let me know,once you check the above.
Thanks and Regards
taran_2005
196 views
Usually answered in minutes!
×