Hey i have a 95 g 200 1.3L charade with no spark i have injector pulse and have replaced the dizzy, coil and external ignitor assy new plugs new temp sensor hve re built with new brarings and reco head also tested the coil lead its all good have power on both sides of the coil plug 12v ??? need help
May be a bad coil even though it is a new one. Did you replace the rotor when you did the dizzy ? Considering all the other new items you've installed, it is very likely the ICM (ignition control module) or the ICM cable/connector harness
If you need further help, reach me via phone at https://www.6ya.com/expert/david_1f7d1c330c9dd97d
SOURCE: charade g200
Yep, but that is not sure, I have got it on a discussion group. I would double check on an Haynes manual before doing the job.
SOURCE: how do I remove the
If you have to sak you need to get a workshop manual. The engine hasn't changed since the late 80's, so a general Gregorys for Charade should be adequate.
SOURCE: Distributor replacement
If you are in NSW Aust Procomp is sydney retroed my points dissy with a hall effcect sensor and custom window plate. its worth the call
169 views
Usually answered in minutes!
×