My keyswitch is broke wire colors are two red wires one brown one yellow for starter one pink onewhite foru small wires three black one green how do i wire them together to make engine stay running
You need gm electrical diagram to ignition switch circuit.
if you got wires mixed up you need gm manual haynes not going to have wiring diagram you cant by pass theft security system it is all tied in the pcm .if you try disable the theft security system by hot wiring circuit the pcm will not recognize set up so car will stay in theft security mode which will disabe starter and fuel system car wont never start again until you fix theft security system.problem could be transponder key,fault in the ring sensor in the ignition switch lock cylinder, problem could be in the immobilizer control module and pcm.this really is a dealership fix.
all newer vechicles set up if you have problems with airbags, abs brakes,transmision tcm,or problem with security theft system and pcm factory made car for the dealership to fix you cant by pass hot wire any thing entire car pcm control all the old 50s 60s 70s 80s to early 90s you could fix it your self.now all car with new theft security was put on cars because they are more high tech and valuable people was hot wiring cars stealing them like candy in a way theft security good only problem you cant hot wire bypass the system.
×
This year vehicle has an antitheft system on it. You may not be able to hotwire it. This link explains the system.
http://vatspasslockpasskeysecurityhelp.yolasite.com/
117 views
Usually answered in minutes!
×