There is a hose that goes from the valve cover to the air intake system that is broken. I get codes P1443, P0136, P0141. Have no idea what they mean? The car has been stalling and is very hard to restart. I have searched my repaur manual and owners manual and can not find the answer.
Have you replaced the broken hose? The bad part can cause the other codes to appear so fix what you know is bad, disconnect the negative battery cable for 10 minutes afterwards and then start it up and see what happens.
All you need to do with the codes are to put each one in the search bar and search for ford code p1443, ford code p0136, and ford code p0141. But do that after you fix the obvious problem.
SOURCE: I have four codes. P0136, P0141, P0171, P0401.
p0136 and p0141 are o2 sensors and p0401 is a egr flow and the p0171 means its running lean on low bank 1
SOURCE: p1443 auxiliary emission control, 1997 mustang gt
DTC P1443 EVAP Purge Control Solenoid '2' Circuit
Fault
Check the evap line and components for damage. Has a tune up ever been
done?
Good luck.
SOURCE: what is OBD11 code P1443 on my 1998 3.8L Mustang
You will need to change the PURGE FLOW SENSOR and SOLENOID.
195 views
Usually answered in minutes!
×