Please help me get my stereo installed, I need the color codes for 1996 explorer 2dr i am at my wits end. system has two factory plugs one is single tier 8 wire 2nd plug two tier 16 wire
Here it is.
1996 Ford Explorer Car Stereo Radio Wiring Diagram
Car Radio Constant 12v+ Wire: Green/Violet
Car Radio Switched 12v+ Wire: Yellow/Black
Car Radio Ground Wire: Black/Light Green
Car Radio Illumination Wire: Light Blue/Red
Car Stereo Dimmer Wire: N/A
Car Stereo Antenna Trigger: Orange/Blue
Car Stereo Amp Trigger Wire: Blue (If Equipped)
Car Stereo Amplifier Location: N/A
Front Speakers Size: N/A
Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Orange/Light Green
Left Front Speaker Negative Wire (-): Light Blue/White
Right Front Speaker Positive Wire (+): White/Light Green
Right Front Speaker Negative Wire (-): Dark Green/Orange
Rear Speakers Size: N/A
Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Gray/Light Blue
Left Rear Speaker Negative Wire (-): Tan/Yellow
Right Rear Speaker Positive Wire (+): Orange/Red
Right Rear Speaker Negative Wire (-): Brown/Pink
-->
On the 1996 ford explorer there is a factory installed amp in the left rear quarter panel in which you have to bypass to get any sound from the speakers while using an aftermarket deck
Installed new Blaupunct. Alpine. All looks ok. Reads am-fm, CD player shows tracks ok. No sound from any speakers
Easiest and smartest way would be to get plugs from any sterio shop.these plugs wire to the radio and plug directly to the factory harness
not that easy. Mr Anonymous. if the previous owner cut the factory pig tail and hard wired the previos head unit sir. just saying... lmao
×
22,792 views
Usually answered in minutes!
need wireing diagram on ford exp. 96
i have a 1996 explorer eddie bauer and im trying to instal a cd player but i havent been able to find a wire harnis that fits both plugs please help
1996 ford explorer with clarion 6 cd changer. speaker wires color don't mach any wires on radio or cd changer. are speaker wires going to amp. where its the amp. or where are the speaker wires going to
i have a 1996 ford explorer with factory 6cd changer , and now i want to install a new cd player ,got it working but no sound from the speakers ,actually it has 2 plugs i got the power one correct but the one with speaker wires is messed up n not giving out sound from the speakers
i have a sub installed too it gives out little bit of sound with the bass.
number 1 plug gets hot and crackes
no sound with aftermarket stereo plug in factory stereo and speakers fine?
TRYING TO HOOK UP NEW STEREO NEED TO KNOW WHAT EACH OF MY WIRES ARE IN THE EXPLORER
i know its late(years later, lmfao) and to be honest but you probably should have just went to your local audio shop and just pay'd to have someone hook it all up....
×