Need fuse box diagram
It would be in the owner's manual. But if you don't have yours, here's a quick tip.
If you have a test light you can check every fuse in the fusebox in about 5 or 10 minutes, without having to pull a single fuse out. The fuses have a little opening at both ends of the top side where you can touch the probe of a testlight.
Find a good ground source near fusebox to clip negative lead of testlight. Now you're ready. Turn key to on and pull headlight switch. Now every fuse in the box will be powered. To see if any are bad, use the probe and touch both of those openings in the fuse, first one side, then the other. A good fuse will have power at both ends. A bad fuse will have power on only one end. Like I said, about 5 minutes and you can check your whole fusebox.
1,294 views
Usually answered in minutes!
×