Question about Chevrolet Cobalt

1 Answer

How do i remove the oil pan on a 2005 chevrolet cobalt

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Chevrolet Master
  • 815 Answers

  1. Before servicing the vehicle, refer to the Precautions Section.
  2. Raise and support the vehicle.
  3. Drain the engine oil.
  4. Remove the engine drive belt.
  5. On the 2.0L engine, remove the intercooler pump bracket bolts from the oil pan.
  6. Remove the lower A/C compressor bolt from the oil pan.
  7. Remove the oil pan bolts.
  8. Remove the oil pan

Posted on Dec 29, 2011

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Will the oil pan from a 2.2 l chevy motor fit on a 2.0 l chevy motor?


There are probably lots of used oil pans in the salvage yards. The problem is that the salvage operators will only sell them with a used engine. That is why you are being told that there are none available.

To answer your question:
The part number for a 2002 Cavalier 2.2L OHV oil pan is 88890999.
The part number for a 2006 Chevrolet Cobalt SS 2.0L oil pan is 55558816.
So, the simple answer is NO, they are NOT interchangeable.

The good news is that you can order a NEW oil pan from gmpartsdirect.com for about 40% off of dealer MSRP. Click the link below to go there.
http://www.gmpartsdirect.com/results.cfm?partnumber=55558816

May 08, 2012 | 2006 Chevrolet Cobalt SS

1 Answer

How do i remove 2008 cobalt oil pan?


  1. Raise and support the vehicle.
  2. Place a drain pan under the oil pan drain plug.
  3. Remove the oil pan drain plug.
  4. Drain the engine oil.
  5. Remove the engine belt
  6. Remove the lower AC compressor bolt.Remove the 4 oil pan to transaxle bolts (1).
  7. Remove the oil pan bolts.

Jun 17, 2011 | Chevrolet Cobalt Cars & Trucks

1 Answer

How do you take off the oil pan on a 2007 chevy cobalt? I have removed all the bolts that secure the oil pan, but it will not come off.


There is a gasket between the engine and the oil pan. It is probably stuck. You will have to pry it loose with a screwdriver. It may damage the gasket so you might have to get a new one. Make sure you scrape off the old gasket before installing the new one.

May 27, 2010 | 2007 Chevrolet Cobalt Coupe

2 Answers

All the oil leaked out while driving and the engine shut off. Does the 06 cobalt have a safety shut down for that?


It should have the fuel pump tied into the oil pressure circuit in series. I believe once the oil pressure drops below 15 psi the fuel pump shuts off.

Apr 04, 2010 | 2006 Chevrolet Cobalt

1 Answer

I need step by step instruction on removing and replacing oil pan on 2005 chevrolet cobalt 2.2L. What tools I will need.


Most any shop will do this in about half an hour! Why waste your time? Plus it is a very messy job working on your back with oil forever dripping.

Mar 27, 2010 | 2005 Chevrolet Cobalt

1 Answer

My oil pan is cracked and I want to know if I have to remove the engine to change this.


If you can see and get to all of the bolts which hold the oil pan to the bottom of the engine and if it appears obvious that the oil pan can be removed without being blocked by anything else, then you don't have to remove the engine. Come to think of it, I don't think that I have ever seen a car where you had to remove the engine in order to remove the oil pan.

Apr 20, 2009 | 2005 Chevrolet Cobalt

3 Answers

How to change automatic transmission fluid in 2005 cobalt?


hankfan18436
Rank: Wiz chevrolet.gifChevrolet Expert
Rating: 84%, 28 votes
There should be a drain screw on the bottom of the pan, drain the pan it is recommended that you change the filter also, you have to unbolt the pan and lower it to change the filter. bolt the pan back up and fill the transmission back up. i hope that helps you out.
To add the transmission fluid you pull your oil cap remove the cover as if you were going to change the oil filter on the same side as the oil filter or the drivers side their is a cap that has a gear on it look down past the hoses and you will see the black cap you will need a long neck funnel and only use the dex III you will need to find out how much fluid the transmission hold hopes this helps you.

Nov 16, 2008 | 2005 Chevrolet Cobalt

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

343 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...