SOURCE: reset oil change indicator 2008 mercedes benz E350
With the key in position 1, hit the odometer reset button on the left on the cluster 3 times in a row. The cluster should beep once. scroll through the multifunction display with the page buttons until the display shows the onboard voltage screen. It will say something like "UB: 12.2 V" scroll threw this menu with with the up/down until you reach the "service menu" page. scroll down to "confirmation" press +, confirm full service with +. Wait till it says service confirmed. cycle the key off and then back on to position 2. Scroll to the normal service menu where it normally says how many days or miles till next service. If the service was reset correctly, it will say "service display not possible" for a few minutes while it recalculates. You must cycle the key off and back on before it will back out of the onboard diagnostic mode. If you dont back out, the esp/abs/bas lights will illuminate when the car is started
SOURCE: Mercedes 2007 E350, oil change frequency?
depending on the pollution in your area. two to three thousand oh yeah keep in mind synthetic oil is far superior, to non synthetic.
so pic a good oil.
hope2help shack
SOURCE: my check oil level light comes on, but the oil
The oil light regards the oil pressure rather than the oil level. You may have low oil pressure or the sensor may have failed. You need to check the pressure in order to know what the problem is
SOURCE: checking oil level in 2005 mercedes sl600 v12
Switch ignition on,do not start engine
Press button on left steering wheel (not arrow buttons)
When you see outside temp,use arrow buttons untill you see oil level check
181 views
Usually answered in minutes!
×