Question about 2000 Saturn L-Series
Security system light flashing , no service codes , no start
The security light is a visual indication that something in the car's antitheft system is failing. In most GM cars and trucks there is a hidden system that most people are unaware even exists. From the moment you put your key in the ignition, there begins a constant line of communication between your key's security chip or transponder, to the ignition's lock cylinder, and then to the car's TDM. These 3 parts are in CONSTANT communication. If the key is in the ignition, these parts are sending signals to each other. The security light illuminates when that signal gets broken, even just for a second. When the signal breaks, the car goes into antitheft mode. The car thinks its being stolen or hotwired because it is not getting that signal from YOUR specific key. There is where the security light turns on and shuts down your vehicle.
Posted on Jan 06, 2012
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Try this first, it takes about 30 min to do. 30-Minute Learn Procedure 1. Turn ON the ignition, with the engine OFF. 2. Attempt to start the engine, then release the key to ON; the vehicle will not start. 3. Observe the SECURITY tell tale light. After approximately 10 minutes, the light will turn OFF. 4. Turn OFF the ignition switch, and wait 5 seconds. 5. Repeat steps 1 through 4 - two more times - for a total of 3 cycles of 10 minutes. 3x10 = 30 minutes. The vehicle is now ready to relearn the Passlock Sensor Data Code and/or passwords on the next ignition switch turn from OFF to CRANK Important: Turn the Ignition Switch OFF. The vehicle learns the Passlock Sensor Data Code and/or password on the next ignition switch transition from OFF to CRANK. You must turn the ignition OFF before attempting to start the vehicle. 6. Start the engine. The vehicle has now learned the Passlock Sensor Data Code and/or password. 7. With a scan tool, clear any DTCs if needed. History DTCs will self clear after 100 ignition cycles. Without a scan tool you may have momentary starter interruptions while history clears itself. Good luck and hope this helps, keep me posted, be glad to help
Posted on Jun 22, 2009
take the ground line of the battery and press the brake for a few minutes and if the life is still on have the vehicle scann and clear code and have the emission components for the vehicle check
Posted on Sep 12, 2009
There isnt any way to disable it that I know of, if you could, anybody could steal the car. It just needs to be fixed by a qualified repair shop or the dealer.
Posted on Nov 23, 2009
Tips for a great answer:
Oct 29, 2015 | Saturn Cars & Trucks
Jun 29, 2014 | 2000 Saturn SL
Sep 18, 2013 | 2000 Saturn SL
Jun 11, 2017 | 2001 Saturn L-Series
Nov 10, 2010 | 2002 Saturn L-Series
Nov 08, 2010 | 2001 Saturn L-Series
Jul 13, 2010 | 2000 Saturn SL
Jul 06, 2010 | 2002 Saturn L-Series
Jul 10, 2017 | 2003 Saturn Lw 4dr Wagon
Feb 28, 2009 | 2000 Saturn L-Series
Feb 23, 2015 | 2000 Saturn L-Series
6,438 people viewed this question
Usually answered in minutes!