1999 Mercedes-Benz CLK Logo

Related Topics:

A
Anonymous Posted on Oct 23, 2017

99 clk 320 changed key fob batteries car acted funny and key took a minute to unlock and turn in ignition and now it is stuck in and wont turn just stays locked at 0. door locks and unlocks dnt work either it worked i changed batteries in key on monday and on saturday it quit working? is it posible the key lost program i only have one remote

5 Related Answers

onyeredson

Paul W

  • 404 Answers
  • Posted on Jan 06, 2009

SOURCE: mercedes 1999 c200 key fob

Hello Haq!
Could it be the key just needs re-coding? maybe you are worrying to much as £177 would be about right as that would need coding etc., Try phoning your local Merc dealer or take the key and V5 to them for coding (Hopefully)
Good Luck!
Paul 'W'
Onyer~EDson(:0)~[><

Ad

Anonymous

  • 43 Answers
  • Posted on Apr 08, 2009

SOURCE: need to find battery location: 1999 Mercedes CLK 320

Hi, The battery is located in the trunk, under the trunk mat.

Anonymous

  • 6 Answers
  • Posted on Jul 11, 2009

SOURCE: my mercedes clk 320 99 wont start , i turn the

This is probably your starter.

Anonymous

  • 1 Answer
  • Posted on Jul 18, 2009

SOURCE: mercedes clk 320 will not start

i have a 2000 clk320. it would not start sometimes, the engine would crank but it wont start. but after an hour or so it would start. sometime i'll get somewhere park, and come out an hour later and the engine would not start. if your having the same problem, take it to autoparts store ex: autozone or kragen. they could check your battery for free. and if its not the battery. than it could either be your fuel pump. or the crank position sensor. good luck. hopefully this help.

Anonymous

  • 720 Answers
  • Posted on Aug 16, 2009

SOURCE: where is the trnsmission cap for clk 320 model

Hi there,

Mercedes have purposely not put a transmission dipstick in their cars...to STOP any unauthorised persons from tampering with transmission fluid levels.

Electronic transmissions are extremely temperamental - if incorrect type, level is too low (or too high), this will accelerate premature wear and tear, not to mention erratic shifting behaviour.

For this reason, only Mercedes service agents have the required workshop tool (ie dipstick) which they insert into a tube in the transmission, to check levels.

If you happen to obtain the correct tool for your own use....please ensure you use only Mercedes specified fluids....and NEVER overfill the transmission case.

Cheers,

Testimonial: "very very help full"

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

2007 Honda Pilot: Key fob won't program

do you have remote start needs different programming then simple lock unlock and most locksmiths dont have that programming also is the for actually for your vehicle if have regular lock unlock below is how to program also when battery changed need to reprogram fob How to reprogram my Honda key fob insert the key into the ignition and turn the key to the "on" position. Press and hold either the "lock" or "unlock" button on the remote for one second. Release the button on the remote and turn the key in the ignition to the "off" position. Repeat this process two additional times.
1helpful
1answer

Kiah sportage 1999 remote wont unlock my ignition to get my motor going,i have changed the battery but still doesnt start,,is there any way to bypass the remote to get my car going.

keys into ignition turn to number 2. press fob. doors lock press again doors unlock. turn ignition back remove key. press fob lock doors wait 5 seconds press fob to open doors. then try ignition again. should work. if not then there is something like a chip missing from the key or the ring reader on the ignition is not working.
0helpful
1answer

New battery,lights come on when I turn the key,as well as the fuel pump.then nothing no sound.i just rode it an hour aga

First of all, check the cleanliness and security of the battery cables - particularly the black earth lead where it connects to the engine/bodywork.

You have a fob for the vehicle? It may be because you changed the battery that the system - the immobiliser - is not recognising the key.

Put the key into the ignition and turn on. Then press the LOCK button on your fob a couple of times. Wait 1 minute.

Then press the unlock button on the fob a couple of times. Wait 1 minute.

Turn off ignition.
Turn ignition back on and press the unlock button on the fob and hopefully, the engine will start because the key is recognised
0helpful
1answer

Key will not turn

Car battery might be discharged , or try key lock unlock to calibrate key, hope this helps good luck.
0helpful
1answer

I have a mercedes clk 320 year 2003 and my remote control no longer works. i cant figure out how to replace a battery -- is this possible? how can i do this or do i need a new remote?

Remove the Glove key from the FOB. Inside the slot you can see the little plastic slider. Slider it in and the same time detach the top FOB up and pull it out of the FOB body. After that you will see the battery to replace. Have fun.
6helpful
4answers

My Porsche Key fob no longer unlocks the doors

Insert key into door barrel or ignition lock and turn key, whilst doing this press the unlock/lock button, the led on the dash should flash to indicate this has initialised the key to the car, then remove key and test operation of remote. If this fails then a new remote plus coding to the car by your dealership is needed
0helpful
1answer
0helpful
1answer
0helpful
1answer

HELP HELP !!!!!!! Electric fault i think !!!!!!!!!!

1....ensure the battery in the "Key Fob" is OK............Press either Lock or Unlock button for more than 1 second, the lamp on the fob will light if OK. Change battery if it does not illuminate! 2.....if battery on fob OK.......Re Syncronise the key fob to the car by:.... a brief press on either button twice and within 30 seconds turn Key to position 2 on the ignition lock
Hope that fixes it...let me know?
0helpful
3answers

Mercedes S320 central lock

if you hav a remote control key &yr car wont respond . change key batrrey &contact dealer if still dont work for software
Not finding what you are looking for?

141 views

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...