The windshield wipers on our 2000 Suzuki esteem won't park. They are stuck in the middle on the window and wont budge. Fuse is good, there is current and ground. They worked once this morning and stopped where they are. There is a good amount of ice around the base of the wiper arms, could the ice be the problem ?
Wiper motor is bad
Hi
Good chance is you wiper motor is blown.
check the motor
SOURCE: 2001 grand vitara windshield wiper squeaks
i had the same prob.take the cover off to the linkage and spay white greasse on to the linkages, spay all kinds of it
SOURCE: how do i changing alternator suzuki esteem 2001
take it to a mechanic trust me, i had to replace mine after 6 days of trying to figure out how to remove the bottom bolt i took it to a shop if you need to know more email me [email protected]
SOURCE: is ther a picture of the tension pully arm for my
The tensioner itself is not meant to be taken apart. If you do, it's one difficult job to put back together again! Assuming you just want to either remove or replace the belt, all you need is a long spanner or breaker bar (14mm I think) and turn the centre bolt of the tensioner in a clockwise direction. If you're re-fitting a belt, it's best to start with the spanner in a position where you have the biggest possible amount of movement available to turn the spanner clockwise. If you're removing a belt, you'll only need a small amount of clockwise movement, but may need a lot more in the anti-clockwise direction (once the belt is off, the pulley will go back a lot further). The tensioner only has a certain amount of movement and if if doesn't go back much further with the belt removed, you need a new (or shorter) belt.
SOURCE: How to check codes on a 2001 Suzuki Esteem
No, the only way to get the engine codes out of this car is to get the codes scaned. Auto zone offers free engine code scans. Hope this helped =)
120 views
Usually answered in minutes!
×