SOURCE: Ihave a 1996 Nissan Maxima.
You need to program it. Here is how you doit.
Step by step:
1- get inside and lock all door with the "power dool lock switch"
2- insert the key into the ignition 6 times "IN and OUT" nice and steady until your hazards flash on dashboard. You can just keep inserting the key until you see the hazards flash, but 6 times should do it / get you into the program mode.
3-once the hazards flash, turn the key to ACC position (dash light up, but car is not running)
4-press any button on the remote (hazards should flash)
5-turn key OFF
6-remove key
7-unlock door with "power door lock switch"
8-open door DONE.
Good luck
SOURCE: i hooked up a new radio in my 96 nissan maxima and get no sound.
Hook up the Amp Turn on Wire usually blue/white strip
SOURCE: cannot get my car to lock without the keyless entry
check the room 10a fuse that is the problem
SOURCE: I need the keyless entry code for my car
It should be on the computer. But this computer is behind the panel in the left, rear part of the vehicle. But if the code doesn't work then either the past owner changed it or there is another issue.
Wrong amp fuse or maybe you have a loose wire or a short somewherecausing the fuse to burn out?
111 views
Usually answered in minutes!
on the head unit there are two power wires ,one should be hot{have 12 volts}all the time,the other should only be hot with the key on only.constant hot is usually yellow,ignition hot is usually red.
×