Hi
I have just bought a 2 litre Hyundai coupe with an autobox. The problem I am having is when you put it in drive it pulls away as normal but then as you pick up speed flicks back to neutrel and sometimes cuts out as a result.
It drives ok normally in the lower gears but as soon as you pick up speed the problem starts.
I have asked around a few mechanics but none of them have any autobox epierence.
Please note I have not selected the right product as it was not listed the car I have is a hyundai Coupe not an Elantra.
SOURCE: removal of gearbox cv joint
It just pulls out of the geat box, it has a internal snap ring, they can really bwe a bear if they're being pulled for the first time.
SOURCE: Hyundai Coupe gearbox ( not car in product)
hi there! i was a master tech 4 hyundai, first of all has the atf fluid been changed and at the correct level. or have you had the multifuntion switch checked? please feel free to contact myself and i will advise you as required with my exsperience
many thanks
Dominic Hill
SOURCE: 2002 Hyundai Coupe 2.7L V6 clutch problem
Hi what your going to have to do is. unhook your slave cly and take a pry bar and pry the fork bar towards the front of the car you will hear a click. that means you have poped the throw out bearing into the plate. You did nothing wrong they just have to be popped in.
SOURCE: Remote control receiver unit were is it , and a
This reset for key fob Hyundai coupe year 02 to 04
Turn ignition to position two
Press lock or unlock once
Ensure indicators flash once to confirm reset
This will enable fob providing you have no other faults
Good luck barry
78 views
Usually answered in minutes!
×