The horn does not work. The fuse is ok. the same fuse protects both the horn and emergency flashers. the flashers work fine. I cannot hear any clicking noise for the horn's relay. Where is the horn's relay?
Thanks
Will
Hi
Check whether power is coming to horn.
if ok means then check the horn
thank you
Hi
Thank you Mr. Will Brown this our duty to say solution for ur problems once again i say thank you Brown. Have a nice day..
Hi
Change the horn.. Mr.Brown
thank you
Hi Brown
Thanks once again this our job have good day Mr.Brown...
×
1,662 views
Usually answered in minutes!
Good Day Thafa!!!!
Thanks for the advice. I did disconnect the horn and used a multimeter for a few tests. I tested the voltage at the end of the wires connected to the horn and got a reading of +- 29 volts. I used the continuity tester on the horn itself and got a "short" alert, less than 50 ohms. A resistance test showed -+ 2ohms. I think this means new horn time but I am a real amateur when it comes to auto electrical systems and would really appreciate your insight on these tests.
Thanks in advance
Will Brown
Wow, that was the best $10.00 I have spent on car repair in a long long time.
Thanks again for a quick and helpful response
Will Brown
the horn relay just clicks horn does not work
×