I can put my 2002 land rover frreelander in drive but it jumps to code F4 AN WILL ONLY DRIVE IN 4 GEAR
The transmission in this truck is computer controlled so what must be done 1st is to have the control module scanned for fault codes so you can make sense of what area needs to be diagnosed and repaired to cure the problem. Right now you are locked in failure mode strategy or limp as some call it.
SOURCE: land rover discovery 1994 gear selection
Hi there!
I'm a Land Rover owner myself - old school Series models.
This sounds like major gearbox trouble.
As the selector shafts are different for gears #2 and #4, I may be inclined to think there is an external problem around the base of the gearlever.
Probably cheaper to have a look here first.
If you've been offroading, it's possible you've managed to get a stone in there.
With the covers off the transmission, if there is no fault externally that you can see, then the gearbox may have to be stripped to find the obstruction.
You can always join one of the Landrover forums to assist on this and other matters.
Hope this helps you. If it does, please rate as Fixya! Thanks.
SOURCE: I have a Land Rover it starts but when I want to move it?
brake swith at the brake pedal.
both mine and my wifes Land rovers did the same thing.
once replaced car would go into gear.
do your brake lights stay on no matter pressing or not?
SOURCE: land rover clutch. can't get into gear
it's an odd occurance but it sounds like the hydraulic fluid in the clutch lined may have boiled. it's usually okay once it's cooled down, but if the pedal feels weird you may want to bleed your line.
Testimonial: "Sorry for delay in reading solution just move house, bleeding the clutch! is this a easy job, where abouts is the bleed nipple? thanks 4your time"
1,683 views
Usually answered in minutes!
×