Here are the definition and possible causes of the fault code being set. You have a rich fuel condition in bank 1 and 2 O2 sensor, this is not an O2 sensor problem, it is fuel mixture control
P0138 DODGE - O2 sensor 1/2 Circuit high
Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- High Fuel Consumption
- Excessive Smoke from Exhaust
Possible causes
- Rear Heated Oxygen Sensor Bank 1 harness is open or shorted
- Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Faulty Rear Heated Oxygen Sensor Bank 1
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
P0158 CHRYSLER - O2 Sensor 2/2 Circuit High
Symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- High Fuel Consumption
- Excessive Smoke from Exhaust
Possible causes
- Rear Heated Oxygen Sensor Bank 2 harness is open or shorted
- Rear Heated Oxygen Sensor Bank 2 circuit poor electrical connection
- Faulty Rear Heated Oxygen Sensor Bank 2
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks
These codes, po 138 bank 1 sensor 2 shorted to voltage and code po158 means bank 2 sensor two shorted to voltage. these are the two rear oxygen sensors in the exhaust system. there two up frt and two in the rear, check the wiring on the two rear sensors, make sure that the wiring is not cut or stuck between metal. if the wiring is good then replace both rear sensors, when you get them ask for the left and right after the cat sensors. or bk1 s2 and bk2s2. after replacing them reset the computer. go to an auto parts sotre or if you have a code reader you can do it. hope this helps good day.
2,686 views
Usually answered in minutes!
×