My 1995 acura nsx starts and just got a new battery and then it wil click and will not start and i have to bump the starter intell in starts is the starter or plug wires

The plug wires have nothing to do with the engine not being cranked over by the starter.

If you hear a single click every time you try to start the vehicle and the starter doesn't not turn the engine over than the starter is most likely the problem.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

This procedure usually works:
·Check the battery cable connections:
Make sure the positive cable, makes a good connection at the battery and at the starter. Make sure the negative cable makes a good ground connection at the battery and (preferably) at the engine.

·Check the battery the simple way, like this:
Turn on the headlights, then try to start the car.If the headlights do not dim or go out, then the battery is likely ok.

·Check the starter and solenoid:
If the wiring looks ok, then look at the starter solenoid for a good connection, and proper voltage at the starter(10 volts minimum while cranking).
If the starter spins and no crank, the problem is most likely the Solenoid's pinion gear is stuck.
Have someone hit (not too hard) the starter while you try to start the car. This usually works by dislodging a stuck pinion gear.
·Make a simple test of the alternator:
If you can, somehow get the engine running, measure the voltage at the battery. It should be at least 13.6 volts to properly charge the battery.