SOURCE: opel corsa 1.4i car cuts
nice motor for work and shopping ,try the idle control valve ,its a steper motor in the side of the monopoint injection housing (looks like a carb body) at the front right side is a round motor looking thing with a multiplug with 4 wires in it ,held in with two torq headed screws ,take it out and clean it but do not twist it or force it in any way
SOURCE: Diagram of waterpump for opel corsa utility 2007
its behind the timing belt ,but i do not have any pictures .
SOURCE: 2001 opel corsa 1.4 is utility. Snapped the
Likely you are talking about the harmonic balancer.
The bolt turns counter clockwise and is generally removed using an air gun. There is another way to do that too but it is a bit dangerous. Using a solid breaker bar (one without jointed end) you can brace the end against the ground with the socket installed on the crank bolt (I actually have a pipe driven into the ground outside just for doing this...I just slide the bar into the pipe and keep it form dropping by using a vise grip on the handle). Once the socket is on the bolt, crank the engine over using the starter, the engine will force the bolt to back out.
After you get the belt installed, tighten it as much as you can by hand and ask a shop to just give it a final tightening with an air gun.
If the socket slips the bar can fly up so be very careful and don't stand where it can hit you!
SOURCE: Opel Corsa engine maintenance schedule and
please tell me about the opel corsa engine maintenance after how much kilometer i will go to change the engine oil and all??
1,636 views
Usually answered in minutes!
×