I need a diagram for a serpentine belt for a 1994 dodge ram 1500 2wd V-6
From tensioner to up over alternator down under idler pulley over top ac compressor around power steeringup and around water pump down around crank back to tensioner
Up your pipe
SOURCE: I need a serpentine belt diagram for a 2004 dodge ram 1500
By chance, have you looked on the underside of your hood, most, if not all vehicles have the diagram there, it should be a white sticker with the pulleys and everything.
SOURCE: Need serpentine belt routing diagram for 1994 Dodge grand caravan
3.3L?
Looking at the engine from front (right side of the Van): Stating at the Top, Going Left to Right and Clockwise:
Over the Alternator
To under the Idle Pulley,
To Over the AC Compressor.
To the Left Side of the Water Pump.
To the Right side and Under the Crankshaft Pulley
To the Right side and Over and Down the Tensioner
To Under the Power Steering Pump
And Back up-to the Left side of the Alternator.
Advise when puting it on:
Put the Belt around everything else accept for the Alternator. After it is around all the rest of the Pulleys - Pull the belt up - tight from the Power steering Pump and the Idle Pulley to form a loop, holding the Belt close to the Altenator Pulley.
Using the 15mm wrench or belt tensioner bar - rotate the Tensioner Pulley towards the front of the Van and then place the belt over the Alternator.
Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!
747 views
Usually answered in minutes!
Serpentine belt diagram
×