2004 Opel Corsa 1.3 Logo
Posted on Feb 26, 2012
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

No fire on spark plugs, check the budge cords, check map sensor, caol packn please help.

1 Answer

raj somaiya

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Opel Master 5,370 Answers
  • Posted on Feb 26, 2012
raj somaiya
Opel Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Nov 12, 2010
Answers
5370
Questions
0
Helped
3570745
Points
14579

For spark plug problem,click the help links provided below :---Car has no spark? http://schematicsdiagram.blogspot.com/2011/06/car-has-no-spark.html
------------How to Replace Spark Plugs? http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-spark-plugs.html
-------------Car cranks, has spark but will not start?

http://howtobyme.blogspot.com/2011/12/car-crankshas-spark-but-will-not-start.html

------------------------
The spark plug firing order for car? http://schematicsdiagram.blogspot.com/2011/06/spark-plug-firing-order-for-car.html
----------How to gap spark plug ? http://technoanswers.blogspot.in/2012/02/how-to-gap-spark-plug-on-chevy-impala.html----------- Spark plug Replacing for? http://technoanswers.blogspot.in/2012/02/spark-plug-replacing-for-chevy-impala.html
-----------How to identify number one spark plug on the distributor cap? http://schematicsdiagram.blogspot.com/2011/12/how-to-identify-number-one-spark-plug.html
---------How does the spark plug wire go on the distributor cap? http://schematicsdiagram.blogspot.com/2011/12/how-does-spark-plug-wires-go-on.html
---------Spark plug Firing Order Diagram? http://schematicsdiagram.blogspot.com/2011/12/2006-suzuki-forenza-spark-plug-firing.html
-----------This will help.Thanks.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

What does the map sensor do

the map sensor is manifold absolute pressure it gave the load on engine.
do you have any engine code , do you have fire to spark plugs

hope it helps
0helpful
1answer

Miss fire when giving it the beans. new spark plugs and coilpacks. please help

check map sensor and timing ,,,,,, rare problems may in engine's head (walve or gaskit)
0helpful
1answer

2005 dodge neon problems

Check for disconnect hose or a vacuum leak
0helpful
1answer

97 geo prizm mis firing

1. Check resistance of the spark plug high tension cords. (approx. 6 KOhms to 25 K Ohms with DMM on the range adjusted to 10K or 20K whatever range is available on the meter).
2. Check the distributor cap and rotor (if it is distributor type ign. system, other wise CMP and CKP sensors).
3. Adjust the spark plug gap to 0.7 mm - 0.8 mm.
4. Check the valve tappet clearance. (0.25 - 0.30 mm)
5. Check the valve timing.
6. Check the MAP sensor.
0helpful
2answers

2000 lincoln ls want start. replace fuel pump and fuel pump relay.

have you checked the fuel pressure regulater or the map sensor
0helpful
1answer

2006 aveo stalling and no power. # 1 cylinder not firing properly. Start it again and for a couple of minutes starts running rough again. changed plug and checked spark, both ok. ses codes p0106 the first...

code p 0106/7 refers to manifold absolute pressure (MAP) and BARO pressure sensor --range /performance and low input problems ===causes wiring ---MAP sensor---Baro sensor --wiring short to ground ---ECM
no 1 not firing would be a problem injector
0helpful
1answer

Why does the car do bad on gas?

Several things that cause poor gas milege! Bad thermostat,temperature sensor,MAP SENSER,OXYGEN SENSOR ,MASS FLOW AIR SENSOR,PLUGGED CONVERTER,FAULTY COMPUTER,CHECK IGNITION TIMING.
lOW TIRE PRESSURES. VACUM LEAKS,TO MAP SENSOR FUEL PRESSURE REGULATOR ,AND INTAKE MANIFOLD,PLUGS MISS FIREING BAD WIRES,DIRTY, WORN OUT SPARK PLUGS .
0helpful
2answers

Will a map sensor cause the car not to get spark

No all a map sensor measures the pressure in the mainfold. But if you have a code for a map sensor i would suggest replacing it. Check your spark plugs cap and rotor.
11helpful
1answer

I need the diagram to put the spark plug cables

2003 Chevrolet Malibu 3.1L SFI OHV 6cyl
Spark Plug Wires - Removal & Installation

3.5L Engine
  1. Before servicing the vehicle, refer to the Precautions Section.
    NOTE Twist the spark plug boot one-half turn in order to release the boot. Pull on the spark plug boot only. Do not pull on the spark plug wire or the wire could be damaged.
  2. Remove the intake manifold cover, if required.
  3. Disconnect the left side spark plug wires from the spark plugs.
  4. Disconnect the left side spark plug wires from the ignition coil.
  5. Remove the spark plug wire clips from the Manifold Absolute Pressure (MAP) sensor bracket and the heater inlet and outlet pipe tab.
  6. Remove the spark plug wire assembly.
  7. If replacing only one plug wire, open the retaining clips and remove the appropriate spark plug wire.
  8. Disconnect the right side spark plug wires from the spark plugs.
  9. Disconnect the right side spark plugs from the ignition coils.
  10. Remove the spark plug wire assembly.
  11. If replacing only one plug wire, open the retaining clip and remove the appropriate spark plug wire.
To install:
  1. Install the spark plug wire assembly.
  2. Connect the right side spark plugs to the ignition coils.
  3. Connect the right side spark plug wires to the spark plugs.
  4. If replacing only one plug wire, open the retaining clip and install the appropriate spark plug wire.
  5. Install the spark plug wire assembly.
  6. Connect the left side spark plug wires to the spark plugs.
  7. Connect the left side spark plug wires to the ignition coil.
  8. Install the spark plug wire clips to the MAP sensor bracket and the heater inlet and outlet pipe tab.
  9. If replacing only one plug wire, open the retaining clips and install the appropriate spark plug wire.
  10. Install the intake manifold cover, if required.

Fig. 2.2L Engine Firing Order: 1-3-4-2 Distributorless ignition system
74d742b.jpg


Fig. 3.1L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
306b531.jpg


Fig. 3.5L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
9313fa7.jpg


Fig. 2.4L Engine Firing order: 1-3-4-2 Distributorless ignition system
2c9af72.jpg


Fig. 3.1L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
d929c16.jpg


Fig. 2.2L Engine Firing Order: 1-3-4-2 Distributorless ignition system
f357cd3.jpg

Fig. 3.5L & 3.9L Engines Firing order: 1-2-3-4-5-6 Distributorless ignition system
09e9db9.jpg

I really hope help you with this (remember rated this help) Good luck.
0helpful
1answer

1993 grand cherokee runs rough

Have you Checked And Seen If the Spark Plug Could Be In The Wrong Fireing Order, Sounds Like the # 5 & 7 Are Crossed If Not That Call Me At 870-718-8850
Not finding what you are looking for?

1,591 views

Ask a Question

Usually answered in minutes!

Top Opel Experts

Brad Brown

Level 3 Expert

19187 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Francois Havenga
Francois Havenga

Level 2 Expert

69 Answers

Are you an Opel Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...