Trying to locate baro sensor on 1998 pontiac sunfire 2.4L engine
SOURCE: How to change spark plugs in a 1998 Pontiac Sunfire GT
gt will have a 2.4L DOHC their beneath the cam cover right ontop
SOURCE: 97 Pontiac Sunfire - where is the temperature sensor located?
the coolant temp sensor is located: Under hood, driver side, upper engine area, below
valve cover, mounted in cylinder head
SOURCE: need location of crank angle sensor on 1997 pontiac sunfire 2.2 liter
Hello oldiro: My name is Roger and I can help. From under the vehicle look up between the transmission and the side of the block. Mid motor above the pan rail there is a bolted in sensor. This should be the crank sensor.It will have two wires plugged in to it. Please rate this answer as this lets us know you received the information you asked for. Should you need further help please just ask. Thank You for using FixYa. Roger
SOURCE: location of crankshaft sensor
Hello mitchoreb: My name is Roger and I will be glad to help with your answer. You will need to raise the vevicle in order to see the sensor. Make sure to use safety stands when ubder the vehicle when raised up.Look in the area behind the oil filter.Just in front of the knock sensor.This will be just above the oil pan rail.The knock sensor is a round sensor with a round plug.The crank sensor should hove a oblong plug. You should have a picture along with this reply. Should you need any further help please just ask. Please rate the answer you received as this way we know you recived helpful information. Thank You for using FixYa.Roger
SOURCE: code came back as iat sensor reading high
the iat sensor is located either in the air cleaner housing or in the ducting that goes from the air cleaner to the throttle body
81 views
Usually answered in minutes!
×