My radio (clio) wont accept the code..it is right code...help...it allows u to enter code but still doesnt work

Try disconnecting the battery and leaving it for at least thirty minutes. This should reset the radio back to the zero point. Then enter the correct code.

When you disconnect your battery and then reconnect it again, it disables the radio. This is an anti-theft protection for your car radio.
The enable your radio the activation code is in your vehicle owner's manual. If you do not have this code you need to go to your Renault service centre and get them to enter this code for you.

After 3 tries, it wont even accept the code on the radio display, showing the ERR condition. Disconnect the battery for 15 min. This will erase the ERR condition, and allow you to introduce the reactivation code.

Nobody is supposed to have the complete database of codes, only authorised dealers. As a security measure, any time the battery is disconnected, the radio is Locked Out, and will not function until the security code is entered on the radio itself. Furthermore, after 3 tries, it wont even accept the code on the radio display, showing the ERR condition. Check for a sticker with the radio code inside the glove box. Some dealers fixed a second sticker in the owners manual. If not available, get the code from a Honda dealer, and be prepared to show VIN number, and proof of vehicle ownership.When you get hold of the code, disconnect the battery for 15 min. This will erase the ERR condition, and allow you to introduce the reactivation code.

As a security measure, any time the battery is disconnected, the radio is Locked Out, and will not function until the security code is entered on the radio itself. Furthermore, after 3 tries, it wont even accept the code on the radio display, showing the ERR condition. Check for a sticker with the radio code inside the glove box. Some dealers fixed a second sticker in the owners manual. If not available, get the code from a Honda dealer, and be prepared to show VIN number, and proof of vehicle ownership.When you get hold of the code, disconnect the battery for 15 min. This will erase the ERR condition, and allow you to introduce the reactivation code.

As a security measure, any time the battery is disconnected, the radio is Locked Out, and will not function until the security code is entered on the radio itself. Furthermore, after 3 tries, it wont even accept the code on the radio display, showing the ERR condition. Check for a sticker with the radio code inside the glove box. Some dealers fixed a second sticker in the owners manual. If not available, get the code from a Honda dealer, and be prepared to show VIN number, and proof of vehicle ownership.When you get hold of the code, disconnect the battery for 15 min. This will erase the ERR condition, and allow you to introduce the reactivation code.

are you entering code correctly, also after 3 trys the radio locks you out, you now need to leave radio on for one hour before trying to enter the code or else it will not accept it,may need battery charger so battery doesnt go dead during the hour, hope this helps.

With the radio in safe mode, you have to disconnect the battery again to reset the radio so you can enter the right radio code. If you don't have the radio code or it's wrong, keep me posted. be glad to help you get your radio working again. Good luck, friend.

Check the fuse and relay to the power window, as for the radio if it does not take any more codes, just disconnect the battery for 1 min and the radio should reset it self for you to try to enter the right code. If you don't have the code to the radio go to www.radio-code.com and they should be able to help you get your radio working again. Good luck and keep em posted.

enter the radio code by pushing buttons 1,2,3,4 on the radio and then push button 6 to confirm the code

if code is 3756 you sohuld push button 1 for 3 times, button 2 for 7 times...and then button 6 for few seconds