SOURCE: 2003 Mercedes Benz E500
There is a valve that is located between engine and firewall. I fixed it myself with help from benzworld.org. It seems to be a common problem with this model and the new valve has a slightly different part number and is supposed to be better. It took about 1 hr. you have to take a few parts off to get to the valve, but if you can handle basic tools, it should be ok. there are great step by step pics on the benz site. part is about $40 at dealer. good luck!
SOURCE: 1992 Mercedes-Benz Mercedes Benz 400... Problem:
Hello, What you could have is and ignition problem. I have had to replace many distributor caps (2) and rotor buttons (2) on this model to solve this same problem.
I hope this helps.
CYA, Gtaor241
SOURCE: light in dashboard.
hi,wrench light in cluster is only for maintenance,battery,plugs and wiring are ok,maybe you can check fuel pump motor or fp relay,ty
SOURCE: My mercedes Benz S280 run rough after i serviced it .
The timing of firing or tuning of the engine is needed with the Distributor to be checked for worn out contact points. As a precaution clean the fuel & air filters too.....sodeep
SOURCE: 2004 e500 mercedes trans problem code-2767 need
Hi,
The code P2767 definition is ,
Transmission input shaft speed sensor?turbine shaft (TSS)sensor B no signal..
Now in English it means the speed sensor is either faulty or bad connection,I would suspect the sensor, but worth getting checked by a transmission specialist,
Darren DCS
363 views
Usually answered in minutes!
×