SOURCE: check engine light on - 2003 gmc envoy XL
That code represents a lower than expected reading for temperature (coolant). First thing to do is check your coolant level, as if it is low, then the sensor can not read correctly. Second, you may have a thermostat that is stuck open, allowing the coolant to cool off too much. The sensor should be mounted on top of the engine, near the thermostat housing.
SOURCE: 2005 GMC Envoy SLE blower fan speed #5 is not working
More than likely this should just be your resistor. You have different sized coils on the back of your resistor for all the different fan speeds. if one of them burns out or breaks then that certain speed will not work.
SOURCE: blower doesn't work at high speed
you will need to replace the fans blower resistor. its mounted in the cab. in the lower right side of the heater box. some aftermarket suppliers are carrying the part but all chevy or gmc dealers will have it.
good luck chris
SOURCE: 2005 gmc yukon xl denali service ride control
it has to do with your air ride suspension best bet is take it to the dealer there is probably a problem with a level sensor. hope this helps you
SOURCE: check engine light....coolant temperature sensor
take altanator off and it is located right behind
302 views
Usually answered in minutes!
×