Color code
This is what I had. There is a size limit as far as posting pictures on here (fixya.com) so if you need a larger picture, feel free to email me at [email protected] and I will be happy to email it to you but remind me of your make, model & year. Hope this helps.....
SOURCE: wiring problems
Here are the installation instructions for your wiring:
http://www.draw-tite.com/fitguides/pdf/N118315.pdf
Hope this helps!
SOURCE: I need the wiring diagram for installing a trailer
sammy tatz,
There usually is not a diagram for this type of wiring, as it's wired directly into the current wires. You simply need to follow the wires on the truck (if doing the plug here) and run the wiring to these as needed per light.
If you are wiring the trailor - the new wiring harness should be color coded as well as labeled (if new) for each light. Trace the wires (if attached still) and attach each wire as necessary to it's appropriate light.
I have never personally heard of wiring diagrams for this, at least not for aftermarket wiring. Any other diagrams for wiring can be found in a service manual for your truck.
Please let me know if you need further assistance with this matter.
carsandcomps,
Guru, Premium Expert @Fixya.com
SOURCE: I have a 99 Silverado
tail wire is brown.
signal/brake is yellow on left and dark green on right
ground is black
OK?
I realize the year is wrong but it will be pretty close, the wires need too be checked with a test light or a voltmeter to be sure the problem is were your working
GOOD LUCK
4,857 views
Usually answered in minutes!
×