SOURCE: reset oil change indicator 2008 mercedes benz E350
With the key in position 1, hit the odometer reset button on the left on the cluster 3 times in a row. The cluster should beep once. scroll through the multifunction display with the page buttons until the display shows the onboard voltage screen. It will say something like "UB: 12.2 V" scroll threw this menu with with the up/down until you reach the "service menu" page. scroll down to "confirmation" press +, confirm full service with +. Wait till it says service confirmed. cycle the key off and then back on to position 2. Scroll to the normal service menu where it normally says how many days or miles till next service. If the service was reset correctly, it will say "service display not possible" for a few minutes while it recalculates. You must cycle the key off and back on before it will back out of the onboard diagnostic mode. If you dont back out, the esp/abs/bas lights will illuminate when the car is started
SOURCE: 2005 mercedes benz 320 diesel
These instructions will work from 09/01/2003 and up 211 Model E Class Mercedes
1. Insert igntion key, switch to position "1"
2. press the page button (looks like a page in front of another page. Use the one with the writing on the rear page) on the steering wheel controls repeatedly until the mileage is displayed within the multifunction display.
3. Press the cluster illumination button 3 times in short succession. The battery voltage will be displayed.
4. Press the up or down arrow buttons until the service menu appears.
5. Use the + and - buttons to select the menu option "confirm"
6. Press the page button on the steering wheel until " complete service" is selected.
7. Confirm "Complete Service" with Page Button. The display will show "Service Confrimed"
SOURCE: How do you reset c230 2007 mercedes benz resetting
Try this, it is the procedure
for resetting the ASSIST computer on many Mercs
1...Turn Key to position No:2 in the ignition /
steering lock and immediately press AND Hold the button "000.0" (the
trip reset button) TWICE within the space of 1 (one) second.
2…Turn the key to position No: 0
in the ignition / steering lock. Then release the button.
3...Press AND Hold the button
"000.0" (the trip reset button) and turn Key to position No:2 in the
ignition / steering lock. Keep button pressed
After about 10 seconds the service
indicator will reset and an acoustic signal may briefly sound
That should do it....Good Luck…...Let
me know if it works?
SOURCE: How do you reset 2006 ml500 mercedes benz
You will need a code reader/scanner called OBD2. They are under $50. A nice one can cost $100-$3,000. Just buy one that does the job...no need for the more expensive ones. You can borrow one from some auto parts stores, like the AutoZone.
You can also pay a shop this much to do it for you, every time.
Just select erase codes, and you're done.
1,601 views
Usually answered in minutes!
×