96 buick park avenue wont start but turns ova theres no gas gettin to the engine

SOURCE: 96 buick key fob

press the unlock & lock button @ the same time.Hold down for 30 to 45 seconds.Should reset.

SOURCE: 95 buick park avenue ignition problem

What is the fuel pressure it has to be at least

1. Ignition "OFF" for 10 Seconds.
2. With ignition "ON," engine "OFF" and fuel pump running, pressure should be 333-376 kPa (48-55 psi). For additional fuel pressure testing, See: Computers and Control Systems\Testing and Inspection\Symptom Related Diagnostic Procedures\A - E Charts & Related Test Procedures\A Charts\Chart A-7 Fuel System Diagnosis
3. Have you tested the compression?
4. A totally plugged cataltic converter can cause tis too because the engine cannot breathe
5. to verify a plugged cat connect a vacuum guage to manifold vacuum and ccrank the engine you should get at least 2-4" of cranking vacuum providing the timing chain has not jumped and the cat is not plugged

SOURCE: 92 buick park ave security light on car wont start

Someone put the wrong key (resistor value) in the ignition lock, you will have to disconect the battery for 3 min. Make sure you have the right key. Very important! Make sure the climate control is off before disconecting/conecting the battery.

honeymokey

• 3113 Answers
• Posted on May 17, 2009

SOURCE: 96 buick park avenue security light comes on car

Replace ing. lock cylinder and chip key.

SOURCE: 2000 Buick Park Avenue Service engine soon light

need to take car somewhere to have the code read with a scanner,try parts stores first some will do it for free if not the dealers have them