2008 Highlander Maint Req'd reset proceedure

Have u checked the dash for a manual reset button

I had this happen just last week, after I took my Highlander in for an oil change, though not at a dealer's. I reset the "maintenace required" display, and it solved the problem. While holding the Trip Odometer A button, press and hold the Engine Start button. The display should say "resetting maintenance," and warning lights should go off.

This is the reset proceedure for a 2008 Highlander with a key-type ignition:

Turn the key ON, do not start the engine.

Look at the odometer, and verify that it displays "TRIP A". If it is on "ODO" or "Trip B", press the black stick next to the odometer to read "TRIP A".

Turn the key OFF.

Press in, and HOLD the black trip meter reset button, hold it IN.
DO not release it.

Turn the key ON, do not start the engine

Observe the Odometer display. You will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, 5 zeros. Then, whatever number that was displayed on "TRIP A" will be re-displayed..

Now release the black trip meter reset stick.

This completes the reset procedure, and it will be back on in 5,000 miles, to remind you of you next oil change

This is the reset proceedure for a 2008 Highlander with a key-type ignition:

Turn the key ON, do not start the engine.

Look at the odometer, and verify that it displays "TRIP A". If it is on "ODO" or "Trip B", press the black stick next to the odometer to read "TRIP A".

Turn the key OFF.

Press in, and HOLD the black trip meter reset button, hold it IN.
DO not release it.

Turn the key ON, do not start the engine

Observe the Odometer display. You will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, 5 zeros. Then, whatever number that was displayed on "TRIP A" will be re-displayed..

Now release the black trip meter reset stick.

This completes the reset procedure, and it will be back on in 5,000 miles, to remind you of you next oil change.

This is the reset proceedure for a 2008 Highlander with a key-type ignition:

Turn the key ON, do not start the engine.

Look at the odometer, and verify that it displays "TRIP A". If it is on "ODO" or "Trip B", press the black stick next to the odometer to read "TRIP A".

Turn the key OFF.

Press in, and HOLD the black trip meter reset button, hold it IN.
DO not release it.

Turn the key ON, do not start the engine

Observe the Odometer display. You will see 5 dashes, then 4, then 3, then 2, then 1 dash, and finally, 5 zeros. Then, whatever number that was displayed on "TRIP A" will be re-displayed..

Now release the black trip meter reset stick.

This completes the reset procedure, and it will be back on in 5,000 miles, to remind you of you next oil change.

Hope this helps! Thanks for choosing FixYa!