Anti theft bypass
SOURCE: 2000 jeep grand cherokee 4.0 liter engine timing belt replacement
If you have the same pulley arrangement that most 4.0 engines have that pulley is an idler not a tensioner. Your power steering pump has a pivot bolt, and a slide under the pump. You adjust belt tension using the pump.
SOURCE: How to replace headlights on 2000 Jeep Grand Cherokee
One long bolt at the top - requires a 7mm socket to remove the bolt. The light housing will pry out with a screw driver. There are three ball and socket type connectors that hold the housing in and I just pryed off the plastic housing carefully and "balls" pop out of the sockets. Finally, I was replacing the faded plastic housing and it came with a new wiring harness. It's impossible to reach the connector to use the new wiring harness that comes with the new plastic light housing. So just use the existing wiring harness with the new light assembly.
SOURCE: 2000 jeep grand cherokee v8/heater core
Yes it's the heater core, It's a complicated diy job and unless you are an experienced mechanic you are going to need a good workshop manual for the job.
Best of luck.
Please remember to rate this article
SOURCE: I need a wiring Schemattic (Diagram) for a 1996
I work mainly from memory and was a bit concerned that I was giving you the wrong color!
Glad it's OK now! Good luck
SOURCE: Replacing water pump on 2000 Jeep Grand Cherokee V6
i have a 2000 grand laredo jeep cherokee that is leaking fliud bad i think it the water pump how do i fix it ??
923 views
Usually answered in minutes!
ur teeth tickled my balls when i was typing you mangy animal
×