Keeps stalling acts like it is not getting gas
SOURCE: 94 Jeep Wrangler intermittently stalls when put in reverse, drive
Take the air inlet hose off where it enters the throttle body and take a look at the throttle plates. It is likely that they’re dirty and have a build-up of carbon deposits. That is the most common cause for stalling that we see in the shop for your vehicle. Sometimes all it takes is a good cleaning to cure the stalling problem. There is an idle speed setting on your Jeep, but to check and/or perform this service step requires the use of a computer scan tool for your vehicle. If the cleaning doesn’t help ask a repair facility to check and reset, if needed, the minimum idle speed on your Jeep.
Thnx.
SOURCE: Jeep wrangler Fuse box
You have two locations for the fuse box. One is either under the hood or behind the glove box. I would pull apart the glove box and take a look.
SOURCE: 89 Jeep Wrangler. Engine stalls only when I put into gear.
it might be getting to much fuel check the fuel screw
238 views
Usually answered in minutes!
×