I parked when try to get the car in gear it will not go into gear the line to slave is leaking the fluid containes for fluid is not going down the container was empty when i stopped the clutch is all the way down on the floor i filed the fluid reservoir but if is not going down maybe air in line the master was changed last month
Repair the leak and beed the system.
You need too bleed it
SOURCE: 2004 Dodge 2500 Diesel Not Starting
should be a switch on the clutch pedal check and see if it is still plugged in
SOURCE: brake problem with a 1995 dodge dakota
have you checked the power booster and the master cylinder> what about the wheel cylinders> have you looked at them to see if theres a leak somewhere?
SOURCE: How do I bleed the clutch slave cylinder on a 1993
should be self bleeding if pedal is set correct
pedal rod needs 1/8" free play to clutch master clydinder plunger
fill clutch res slowly let bubbles bleed
then only half strokes on the clutch pedal with 30sec pause between pumps
SOURCE: 1974 vw Beetle with no brake pedal....
adjust the push rod that enters the cylinder.Sounds like your not letting the fluid into the cylinder.Shorten the pushrod then try.If still no success extend the rod if that fails you have a faulty cylinder.Hope that was helpfull good luck.
Hope this helps you ??
743 views
Usually answered in minutes!
×