I'm having intermittent problems with shifting, check engine light came on, had it checked at autozone, advance autoparts, and oreilly's and they all gave same code, p0700 and p0760, went to transmission shop and had them put scanner on and it too gave same code, p0760. transmission shop says no apparent internal damage, suggest it may be external of transmission.
SOURCE: 2004 Dodge Caravan check engine light is on
P0406 is egr positon high replace the egr valve and se if the light comes back on for the miss fire on cylinder 4
SOURCE: My 2002 Dodge intrepid has it engine light on
The MAP sensor and Knock Sensor are both very easily replaced. A better scanner will tell you which sensor is going bad on your transmission. An Autozone code reader will not tell you which sensor on the trans. is acting up. Most sensors on your trans. are very easity replaced as well. They just screw in and plug it. It's worth paying to get a "real" scan done. The trans. sensors are inexpensive and you can replace any other your listed sensors yourself.
SOURCE: Error Codes P0700 and P0605
0605 is for an Internal Control Module Read Only Memory (ROM) Error. This is typical of a malfunctioning computer. If the computer is bad, your retrieved codes are probably wrong anyway. May need to replace computer, drive, then see if if your check engine light returns.
SOURCE: trouble with the transmission solenoid
USUALLY A SHIFT SOLENOID DTC IS REPAIRED BY REPLACING THE TRANS SOLENOID PACK ASSEMBLY..LOCATED ON OUTSIDE OF TRANSMISSION..YOU MUST BE CAREFUL WHEN CHANGING PACK..CLEAN ALL DIRT/DEBRIS FROM OUTSIDE OF PACK..YOU DON'T WANT ANY DIRT TO ENTER TRANSMISSION..SOLENOID IS A SMALL BOX LOCATED ON SIDE OF TRANS FACING FRONT OF VEHICLE..YOU MUST REMOVE TRANS COOLER LINE HOSES FROM FITTINGS ON TRANS..REMOVE INPUT SPEED SENSOR..UNPLUG PACK..8MM SCREW HOLDS IT..3 BOLTS HOLD PACK TO TRANS..YOU MUST CLEAN ALL GASKET RESIDUE THOROUGHLY BEFORE INSTALLING PACK..I'D RECOMMEND GETTING SOMEONE WHO HAS DONE THIS BEFORE IF YOU ARE NOT COMFORTABLE DOING THIS..I HOPE THIS HELPS
SOURCE: I have a 2004 Dodge Intrepid SE and the check
P0700 code is a generic code for Transmission Control System Malfunction
P1776 code means your solenoid switch valve is stuck in low reverse. (DTC 47) A stuck solenoid switch valve is a common occurrence in the valve body of the Dodge 41te transmission.
The first step would be to check the wiring to the solenoid from the TCM, then maybe try a new solenoid pack if the wiring is determined to be fine.
406 views
Usually answered in minutes!
×