2004 Pontiac grand am serpentine belt diagram

marcial adorno

• 246 Answers
• Posted on Sep 08, 2009

SOURCE: how to replace a serpentine belt on a 2004

1. Lift the car so you can work from underneath when needed.
2. Disconnect the battery . Just to be safe.
3. Take the serpentine belt off.
4. Remove the alternator.
5. Remove the A/C compressor. (You can do it without removing, but it's a royal PITA... LOL) Don't unhook the lines, just unbolt and move out of the way.
6. Remove the worn tensioner from t he block. (You need to unbolt the pulley first to get to all the tensioner bolts)

Greg Bernett

• 2993 Answers
• Posted on Aug 30, 2009

SOURCE: I need a diagram of the routing of a serpentine

Here ya go:

SOURCE: serpentine belt diagram 2002 pontiac grand am

hope this helps

SOURCE: 2004 pontiac grand prix serpentine belt replacement/ routing

first look underneath the hood... is it there on a sticker... if not i'll need the size of the motor to let you know

Robert

SOURCE: Serpentine belt diagram for a 2001 Pontiac Bonneville SSEI

these motors have two carrier pulleys and oone tensioner. lookinjg at the motor from the rightside of car the belt goes as follaws: crank pully to super charger from the left. the right side goes up to the lower carrier which will have the flat of the belt riding on it. from there the belt routes to the upper carrier
[ loop it over so the grooves ride
] and then under the tensioner any questions contact [email protected]