How do you adjust the headlights on a 2006 chevy cobalt ?
There will be adjustment screws located on at least two different spots surrounding each headlamp. By turning these screws you move the angle of the headlamp. Most shops will do this at a very resonable rate, I say this because improper headlamp angle may lead to a ticket, or at least a warning. To say the least, they have to be at specific angles and heights. Good luck.
SOURCE: HEADLIGHT ADJUSTMENT
6mm or 7/32 alen wrench.the adjustment screw is on the top of the light,easily seen with the hood opened. counter clockwise will raise the light,clockwise will lower it.did my daughters car this morning,took about 1 minute.used a big piece of cardboard obout 5 feet in front of car. to raise drivers side to match pass side.easy fix.
SOURCE: Where are the adjustment screws for the headlights
open the hood and their should be 2 torx headed adjustment screws sticking out of the rearward portion of the headlamp sometimes they have to be accessed thru a hole
3,734 views
Usually answered in minutes!
×