Engine Lt. on, no overdrive, and won't shift into Low with eng. lt. on.
SOURCE: 94 jeep grand cherokee will not shift into overdrive
chk. and see if fuse is ok. fuse box in car and under hood
SOURCE: Jeep Grand Cherokee Limited P0700 diagnostic problem
P0700 means there is a transmission fault code in the transmission controller. Since the transmission controller doesn't have a light attached, it tells the engine controller to turn the light on using this code. You'll have to access the transmission controller to further diagnose the problem.
SOURCE: 95 Jeep Grand Cherokee ''overdrive'' light
I would recommend taking this to transmission shop or the dealer, sounds like there is an internal problem with the transmission.
SOURCE: 2005 Jeep Grand Cherokee Limited, 5.7L V8, starter
Every morning at lunch time and evening my jeep won't start. It doesn't grind but the electrical goes crazy. After a couple of trys it finally starts. Help
SOURCE: 2002 Jeep Grand Cherokee 2.7crd engine light/ no gear changes
your transmission is in "limp home" mode, the problem is one of the sensors on your transmission. you need to have an obdII scanner connected to read the codes stored in your vehicles computer. this will tell you which sensor has failed
Testimonial: "Thanks, will get that checked out"
Trouble Code: P0846
A/T 2/4 Pressure Switch Circuit Malfunction
Possible Causes:
2/4 pressure is incorrect, or internal transmission faults exist
2/4 pressure switch circuit is open, shorted to ground or power
2/4 pressure switch is damaged or it has failed
TCM relay power circuit to L/R switch is open (loss of B+)
PCM/TCM has failed
57 views
Usually answered in minutes!
×