2002 Ford Taurus Logo
Posted on Nov 24, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Mechanic says the front inner tie rods need replacement

Took my car to a mechanic this morning and he noticed that I had a lot of wobble in my right front tire. He said that the inner tie rod needed to be replaced and that the tires will need to be replaced as well because of the way they have warn. I just spent $700 1.5 years ago to have the front tied rods replaced and some other work. Do they wear out that fast? This guy says it will cost me $500 to fix it.....

  • Anonymous Jan 28, 2009

    thats pretty sad.
    this is reason why i will never buy a ford personally.
    or any american car.
    atleast the japs have it under control.
    grandfathers taurus 03 gets a shake at about 60mph and now we have inner tire wear. and we have 92k miles.
    this just started and dont invest in cheapy tires. you want to reduce alot of this take and invest in lower profile tires and wider tires.
    the tires to me are too narrow.
    especially for the weight and design of the car.
    im about to drop some 18's on this taurus and some 225 50 18's do to the fact i know how long my low profiles last i have 35k on mine on my civic and there near new condition. and im not a smooth driver.but i didnt invest in cheapy tires there 300 a pop.

    get a second opinon or else get the chiltons or simular and learn more about the situation.


×

2 Answers

Marvin

Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

  • Ford Master 85,242 Answers
  • Posted on Nov 24, 2008
Marvin
Ford Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

Joined: Jun 20, 2008
Answers
85242
Questions
28
Helped
29058593
Points
266281

They do not wear out that fast, 80,000 miles is a typical replacement point in your Taurus., get a 2nd opinion, wobble can also be caused by bad tires, i.e. a separated tire cord inside the tire. rotated the tires and see if it helps the problem, also an alignment is a good idea.
I am a retired Ford dealer technician, 30 years in the business.

PLEASE RATE THIS INFO

Anonymous

Level 1:

An expert who has achieved level 1.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 36 Answers
  • Posted on Nov 24, 2008
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Aug 28, 2008
Answers
36
Questions
2
Helped
15069
Points
70

No the front tie rods shouldnt wear out that quickly, i still have the originals on my 86 truck! i think that the mechanic must of installed them incorecttyl or "rigged" them i.e. fix it the cheap way

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
2answers

2000 Dodge Durango. WHAT DO I DO WHEN THE MECHANIC IS WRONG?

The tie rod ends should have a taper to them and likewise, the knuckle will have a taper to the hole the tie rod end goes into. As long as the tapers match, you are good. As far as driving without an alignment, if it feels secure when you drive, I wouldn't worry about it. You might get excess tire wear, but if you are only driving for a few days until the parts are in, you should be fine.
0helpful
4answers

Rattling in front end and alignment problems

Sounds like loose wheel bearings and front struts if it has them.
0helpful
3answers

Front wheel feels like it's wobbling when braking

I had that same problem on my Toyota pickup once and replace the wheel. No more problem. Wheel must have had a certain warp to it. Normally though, this wobble you feel would be a burnt spot in a rotor. But you've replaced that.
0helpful
1answer

I need to replace inner and outer tie rods and Idler arms. Is there a diagram?

The inner and outer tie rods are pretty self explanatory remove the nut from the knuckle. Whack the knuckle a couple times where the tie rod goes through and the tie rod will pop out. The inner will releas the same way. Get the sleeve whe you get the inner and outer tie rod. It will make life a lot easier. Assemble the new parts to the approximate same length as the parts you removed and install. The idler arm will be bolted to the frame and then have a ball and socket that will be removed in the same manner as the tie rod end. The pitman arm will require a puller to seperate it from the gear box. Sometimes you have to heat up the end that attaches to the gear box to get them to pop. Sometimes the gear box needs to be removed in order to get the puller on the pitman arm. Lower and upper ball joints are also very common on these. If they have not been done I would have them checked as well.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

0helpful
1answer

I need to rplace the inner tie rods.

Inner tie rods rarely if ever need to be replaced in my experience: outer tie rod ends are far more common. Its not impossible so here's how.

1. remove the tie rod ends from the knuckle.
2. remove the clamp for the rubber bellows on the rack ends, and slide the bellows down the rod.
3. Turn the rack to fullleft or right as needed to get access to the inner rod end that screws into the rack.
4. There's a lock tab that has to be bent flat. This locks the rod end into the rack.
5. You'll need a (probably) 32mm wrench to undo the rod end from the rack.
6. Note how the lock tab is fitted to the rack/rod end.

7. Put in the new tie rods.

If your garage mechanic told you the inner tie rods are worn out, I'd ask why they think so. At step 4. above, try rotating the rod. This should be quite difficult. There should be NO evidence of slop or wear in the inner joint. What more commonly wears is the bushes on the end of the rack. These bushes are easily replacable with the rack in the car.The tie rods have to be removed to do this. So, when the rods are off, inspect the rack bushes for wear.

SD
0helpful
1answer

Mechanic says inner tie rod needs to be replaced. How do I know?

Raise the vehicle and wiggle the wheels left and right. You would know which one has a play if its the inner or the outer. the inner tie rod connects close to the rack and pinion. The outer is close to the tire. Goodluck
6helpful
1answer

How to install inner and outer tie rods on a 2004 Chrysler Pacifica - I waqs told buy a trusted local mechanic that I need to replace 3 of the 4 tie rods. Might as as well replace all 4, but how hard is it...

You will need to rent or borrow in inner tie rod tool but here are the directions.
1. Break the jam nut on inner tie rod to outer loose.
2. Remove nut from outer tie rod attaching it to steering knuckle.
3. Use hammer to get tie rod out of knuckle.
4. Unscrew outer tie rod then jam nut
5. Remove clamp from boot and slide off inner tie rod.
6. Using side cutter or hammer and chisel break off metal clamp on the inside of inner tie rod boot.
7. Using inner tie rod tool, unscrew inner tie rod from rack and pinion
8. Reinstall parts and have it aligned
0helpful
2answers

Any info on tie rods

You have left and right inner tie rods and outer tie rods on your car.
You also have lower ball joints which can wear loose too....not to mention the left and right struts and upper strut bearings.

A cheap (China) tie rod may last only a year.(plastic inner wear points)
A good quality tie rod may last 10.(nylon and/or metal wear points)
0helpful
1answer

I have a toyota corolla 91. I can wobble the front tires by hand back and forth about 1 to 2 inches. When driving, the front tires wobble. Is this the front or back tie rods?, Do you need tools you...

Possible wheel bearing failure, ball joint failure or tie rod end failure. Does the wobble seem to be when tire is moved toward center of vehicle on top and bottom or front and back??
0helpful
2answers
Not finding what you are looking for?

468 views

Ask a Question

Usually answered in minutes!

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...