Question about 1999 Suzuki Wagon

2 Answers

Neeed torque wrench settings for Suzuki Wagon R MB-61S-105796 with K 10A motor need Cylinderhead setting, cambearing cap setting flywheel setting and valve clearances please

Need torque wrench settings K10A turbo 996cc Suzuki wagon R Cylinder head, flywheel, camshaft caps, and valve clearances

Posted by on

  • billeaton1
    billeaton1 May 30, 2012

    Which engine do you have (ie.. size in Liters) ?

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Suzuki Master
  • 14,162 Answers

Posted on Feb 25, 2016

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Suzuki Master
  • 20,706 Answers

Posted by Bob kelly on May 30, 2012

Posted on Feb 25, 2016

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Anonymous

  • 113 Answers

SOURCE: OBD gave code for camshaft position sensor-how to replace?

haynes should have a manual on this car, which will show the location of the cam pos sensor. check autozone or napa

Posted on Jul 22, 2009

t8085579058

Travis Sanders

  • 6 Answers

SOURCE: 2001 suzuki wagon r

Requires a scan tool....

Posted on Mar 20, 2009

Anonymous

  • 1 Answer

SOURCE: suzuki wagon r car horn

I have wagon r 2005 model last night my car would not start can the batteryy die out all of sudden. Which one to buy now. A mechanic identified today that the bat is gone. thanks

Posted on Sep 21, 2009

boysor2933

Boyet Soriano

  • 293 Answers

SOURCE: What are the torque settings to tighten the head

3 step torque: 25 Ft-lb, 35 Ft-lb, 50 Ft-lb.
Valve lash: Both for intake and exhaust: 0.15 MM

Posted on Oct 09, 2009

Testimonial: "Great , many thanks"

johnjohn2

Johnny Brown

  • 5763 Answers

SOURCE: Valve Clearance

valve clearance, with engine hot, intake valves are .005-.006 in, exhaust valves are .011 in, if engine is cold then its intake .009-.011 in and exhaust is .007. hope this helps good luck.

Posted on Nov 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hey there I need the exhaust and Intake(valve) clearance for a komatsu 300-6 please


note Perform the valve clearance check and adjustment at the engine cold state. 1.Remove all of the ignition coils. 2.Remove the cylinder head cover.
caution Turn the crankshaft always clockwise. 3.Turn the crankshaft clockwise, and align the timing mark on the exhaust camshaft sprocket against the upper face of the cylinder head as shown in Figure. Therefore, No.1 cylinder goes to the compression top dead center. 4.Using a thickness gauge, measure the valve clearance with the arrow shown in Figure. If deviated from the standard value, make note for the valve clearance.
Standard value:

    Intake valve 0.20 ± 0.03 mm (0.008 ± 0.0012 inch)
    Exhaust valve 0.30 ± 0.03 mm (0.012 ± 0.0012 inch)
5.Turn the crankshaft clockwise 360 degrees, and put the timing mark on the exhaust camshaft sprocket in position shown in Figure. Therefore, No. 4 cylinder goes to the compression top dead center. 6.Check the valve clearance with the arrow shown in Figure. In the same procedure as 4.
7.If the valve clearance is deviated from the standard value, remove the camshaft and the valve tappet. For the camshaft removal, refer to Camshaft Removal and Installation . 8.Using a micrometer, measure the thickness of the removed valve tappet. 9.Calculate the thickness of the newly installed valve tappet through the following equation.
A: thickness of newly installed valve tappet
B: thickness of removed valve tappet
C: measured valve clearance
Equation

    Intake valve: A = B + [C - 0.20 mm (0.008 inch)]
    Exhaust valve: A = B + [C - 0.30 mm (0.012 inch)] note The valve tappet ranges 3,000 - 3,690 mm (0.1181 - 0.1453 inch) and has 47 types per 0.015 mm (0.0006 inch). The thickness below a decimal point is stamped on the reverse side of the valve tappet. 10.Install the valve tappet selected through the procedure 9, and put the camshaft in position. For the camshaft installation, refer to Camshaft Removal and Installation .
    11.After installing the timing chain, measure the valve clearance using the procedure 3 to 6. Confirm the clearance is within the standard value.
    caution Completely remove all the old FIPG, which might be remaining among the components. 12.After completely removing the liquid gasket adhering on the timing chain case, cylinder block and cylinder head, degrease them with white gasoline.
    caution The cylinder head cover should be installed within 3 minutes of applying liquid gasket.
13.Apply a 4 mm bead of liquid gasket as illustrated.
Specified sealant:
    THREE BOND 1217G or equivalent
14. Install the cylinder head cover and tighten the tightening bolts using the following procedures.
(1) Temporarily tighten to the following torque in order shown in the illustration.
Tightening torque: 3.0 ± 1.0 N·m (27 ± 8 in-lb)(2) Tighten to the specified torque in order shown in the illustration.
Specified torque: 5.5 ± 0.5 N·m (49 ± 4 in-lb)15.Install the ignition coils.

Jan 23, 2017 | Cars & Trucks

1 Answer

We need the cylinderhead torque settings as well as the timing marks for the Nissan UD40 FD46 motor. can you possibly assist? Thanks


1. 29 nm
2. 59 nm
3. slacken off bolts
4. 29 nm
5. 50-55 degrees with angle torque gauge or 54-64nm
10_3_2016_6_03_48_pm.jpg

Oct 03, 2016 | Nissan Cars & Trucks

1 Answer

How do i find torque settings and clearances


Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals

Aug 10, 2016 | Cars & Trucks

2 Answers

I have a 99 R1, and I am installing a flywheel. It needs to be torqued to 9.5lbs. If it's tightened with a socket wrench is the 9.5 lbs achievable?


Use an Inch pound torque wrench (very cheap to buy), then set it to the conversion of 9.5 ft pounds to inch pounds which is 114 inch pounds.

Jul 21, 2016 | Cars & Trucks

1 Answer

Torque settings on a yaris 1.3 16v big ends,mains,flywheel,cylinderhead


Toyota Yaris Main and Big end Torque settings:
Tighten the main and big end bolts in sequential order and in two steps.
Main bearings. Stage 1.
22 ft lbs.
Stage 2.
44 ft lbs

Big end bearings.
Stage 1.
11 ft lbs.
Then Rotate bolt head a further by 90 degrees

Head bolt torque must be done in 3 steps:
1st 22 ft lbs
2nd 43 ft lbs
final 47 ft lbs
use this sequence of tightening:
9 - 3 -1 -6 -8
7 - 5 - 2 -4 - 10

Flywheel spec:
65 ft lbs

Jul 15, 2016 | 2007 Toyota Yaris

1 Answer

TORQUE SETTINGS


anyone want to guess on a MAKE, model ,engine size , year . I do not

Jun 24, 2016 | Cars & Trucks

1 Answer

Cylinder head torque settings and valve clearance


Hi David:
May I suggest that you Google search the make and model of the engine.with the key words Cylinder head torque settings and valve clearance Odds are you'll find the answer.
Cheers

Feb 19, 2016 | Cars & Trucks

2 Answers

Please assist with Cylinder Head Torque and Valve Clearance Specs for Tata Indica 1.4 LXi


i need the head talk settings & valve clearance for tata indica lxi

Apr 20, 2013 | 2006 Tata Indica LXi

Not finding what you are looking for?
1999 Suzuki Wagon Logo

Related Topics:

325 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...