Engine light came on it reads code P0000
SOURCE: trouble codes 2006 ram hemi
Can you tell me where you are getting the codes from? Do you have a hand-held scanner? If you have a hand-held scanner then it should be able to tell you the definition for each code. If this isn't what you're using then let me know where you are getting your codes from, and I will try to give you a more detailed solution.
SOURCE: what is P0000
normally either the ecu is dead or battery voltage is low. check both but also could be ignition coil/s or crank sensor. very confusing i know-who wants to be a mechanic. ford trouble codes are as clear as mud. check battery alternator output then coils.
SOURCE: 2003 ford ranger dtc code index
hi there this code is a common problem with this engine
the dtc code p2004 is related intake manifold runner control it is stuck open bank 1a .
you need to replace controll switch
SOURCE: my check engine light is
my check engine light comes on after a few miles of driving. i've put a obd2 computer on it and there are no codes come up except dtc 111. my overdrive off light also flashes. i've had my trannny rebuilt and computer changed and my throttle postion sensor.
whats with my truck? thanks for the help. 1994 F150 5.0! [email protected]
SOURCE: check engine light
Code P0000 is monitoring test incomplete, or scan not completed
Not sure on the B0008, a b code is usually not a powertrain code
6,159 views
Usually answered in minutes!
0+'
Good q, I in 22 and is a code that is prior to dtc or hidden dtc as there is no way to clear it , obd diagnostics important it went from low to 87 resembling turbo malfunction like no power it is oil filter too and like measures by a ruler metric or a cct a impossible bank one which likely sensor, oxygen , there's no dtc just pending it rises as the metric measure do and for to clear and does that read , I knew it could be a master cylinder malfunction as even those don't reach the calliper at times so turbo malfunction or some other good reason
×