We have a 2001 Dakota Quad Cab and it has started allowing air to come
through the air vents when the truck is moving. Although the switch is
set to off air still flows through the vents as the truck is
traveling. I believe the recirculation door is a fault but I don't
know how to access it, so I can repair the door. Any help would be
great
SOURCE: Blend door not working.
check the vacuum supply and vac lines from the control head for a leak
SOURCE: How to replace power window motor on 2001 dakota
its not hard guys Take the door trim panel by taking off screws and mirror cover / pull out bottom of door and then sides pull up and outthen take off vapor barrier then look inside of door put tape on glass to hold it up take out bolts on the regulator and exchange it Please rate my response thank you very much
SOURCE: 2003 dodge dakota 4.7 auto.quad cab stalls for no
Check Engine Light? Any codes? Possible cam or crank sensor.
SOURCE: No air flows from dash vents
blend door actuator. to fix, the dasshboard has to be removed, A/C has to be reclaimed, and coolant drained. it is not an easy task for the DIY'er. best left to a repair shop as it is an aggrevating and time consuming process.
SOURCE: my check engine light came on 2003 dodge dakota
This code is normally caused by a loose gas cap or a bad EGR valve. It is the code for the evap system on your truck. You can go to autozone and they will clear the code for you if you can not do it yourself. You may need to replace the gas cap and or the EGR valve if the code comes back up, these are normally one time things due to the cap not being fully tightened.
97 views
Usually answered in minutes!
×