How do i find a vacuum leak on a 2001 dodge intrepid
SOURCE: location of waterpump on 2001 dodge intrepid 2.7
Hi....
The Water pump on your Intrepid 2.7L.
Is located in front of the engine, But you can't see because is inside of the timing cover.
And the Water pump is driven by the Timing chain.
I hope this help on your question.
Thank you for use fixya..
SOURCE: find location for oil filter for oil filter for dodge intrepid
What engine? 2.7 passenger side on the bottom next to oil pan. 3.2 and 3.5 Drivers side coming off the side of block, near the front under the exhaust manifold.
SOURCE: location of speed sensor a for 99 dodge intrepid
The "Vehicle Speed Sensor" signal is generated by the transmisson output speed sensor. That is the one located at the rear of the case. It is externally mounted. That supplies "vehicle speed" info to the other On-Board Computers. The input turbine speed sensor is located just behind the bell housing area of the case. I believe the trans controller is the only module that needs that info. The Crank Position Sensor give engine RPM info and it is located on the bell housing near the engine block. I hope this helps.
SOURCE: Multiple cylinder misfires 2001 Dodge Intrepid
If the engine is not missing now or running rough,The code may be an old one stored in the computer,
The code for Evap usually comes from someone getting gas and not tightening the fuel cap so it clicks at least four times.
370 views
Usually answered in minutes!
×