the only bulb in the tail light is the turn bulb the break lights seem to run off a fuse i cant find the fuse box where is that locatedthe only bulb in the tail light is the turn bulb the break lights seem to run off a fuse i cant find the fuse box where is that located
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
follow the steps and fix it. God bless you
Determine what type of taillight bulb you need to purchase.
The 1157 is used in all vehicles in which the brake light and turning
signal use the same bulb. The 1156 is used when those two lights are not
used by the same bulb.
2
Access your taillights through the rear of your vehicle,
typically through the trunk. Pickups and many SUV's have an access panel
in the bottom of the bed area. Consult your owner's manual if you are
unable to determine how to access the taillights.
3
Unscrew the socket to replace the bulb, or simply unscrew the bulb itself.
4
Remove the packaging from around the new taillight bulb.
Grasp the replacement bulb with a cotton towel or hankie. The oils on
your skin can cause the bulb to blister and burst, drastically
shortening its lifespan.
5
Secure the replacement taillight bulb in its proper location and test to ensure it functions properly.
hi all cars that come from the factory are quality controled so it would not be allowed out in such a shoddy condition get someone who knows what they are doing because if its in the fixing locations correctly then your panel work is out proberly due to the impact take it back best of luck yates210456
If you're asking how do you change a taillight bulb, then follow this procedure:
Open the trunk lid.
Disconnect the connectors from the taillights (taillight bulb connectors are visible by looking inside the trunk at the back of the tail lamps.) There may be an interior trunk trim panel that you have to take off but in most cases its just a series of thumb screws that hold them in.
Brake Lights/Taillights: 21/5 W
Rear Turn Signal Light: 21 W
Back-up Light: 21 W
Rear Side Marker Light: 5 W
Turn the bulb sockets 45 º counterclockwise to remove the bulbs.
If you're removing the taillamps with the bumper off there are 3 nuts and screws that hold the taillight to the rear panel of the car that have to come off from the inside of the trunk. Remove the nuts and screws, then remove the taillight.
the only bulb in the tail light is the turn bulb the break lights seem to run off a fuse i cant find the fuse box where is that located
×