2006 Mercury Mountaineer Logo

Related Topics:

A
Anonymous Posted on Mar 14, 2017

2006 mercury mountaineer 3rd row power seat problem

Hi folks, i recently purchased a mercury mountaineer 2006 full options, it is having power 3rd seats but last week, while pulling up the driver (left) side third row seat, it pulled up only an inch or so and then got stuck, there is a sound of motor but seat is not movin at all, and it is stuck in the folded position, i tried to apply some force while my wife pressed the switch but it didnt worked at all, seat didnt moved at all, the 2nd seat (right side one) is moving up/down perfactly... I have seen a lot of threads on internet suggesting to replace the assembly and also we cannot purchase the geaer or the problem part, we have to purchase the complete assembly with motor for both seats. I dont want to spend more money on it, is there a way to convert/make this seat manual... without power... if yes, how can i do it.... regards imran

5 Related Answers

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Jul 06, 2009

SOURCE: 1998 Cougar power seat works in all directions except forward

THE MOST COMMON CAUSE OF THIS IS THE SEAT SWITCH (WIGGLE THE SWITCH WHILE YOU TRY TO MOVE THE EAT), IF THAT DOESN'T FIX IT U WILL NEED TO REPLACE THE POWER SEAT TRANSMISSION, A VERY EXPENSIVE PART, SO TRY THE SWITCH 1ST.

Ad

Anonymous

  • 1 Answer
  • Posted on Sep 07, 2009

SOURCE: '07 Chevy Tahoe 3rd Row seat will not fold down

I have had this problem, and I am having it again. The problem is if a little trash gets under the bar in the floor, it will keep the mechanism from locking completely. I had tried everything. The only solution so far is the rock back and forth. Real pain. I am trying to find a secret release.

Anonymous

  • 1 Answer
  • Posted on Jan 11, 2010

SOURCE: 2007 Tahoe 3rd row right seat will not fold

I solved the problem by spraying WD40 into the front side of the seat support that was sticking. This support has a rubber closure to protect the mechanics of the seat. After spraying a generous amount of WD40, I waited about 5 minutes and tried the lever to fold the seat. It worked and still does.

Anonymous

  • 1 Answer
  • Posted on Jan 17, 2010

SOURCE: third row seat in ford explorer stuck in down

my third seat is stuck in the down position . press switch to raise i hear the motor but nothing happens. 2006 ford explorer

JOHN LAPIER

  • 2602 Answers
  • Posted on Jan 17, 2011

SOURCE: Recently purchased 2004 Mecury Mountaineer Premier

You need to check if 12 volts is getting to the connector at the seat first then we can tell more

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to fix my 3rd row seat in my 2008 mercury mountainer

vise grip to broken end ---order a new cable and replace it
0helpful
1answer

3rd row seating won't come up on one side. Can hear the motor but won't budge.

The gear inside the motor has probably bound up or the flex shaft has cracked the plastic part it turns. Cheapest fix is to get the whole assembly from a junk yard.
0helpful
1answer

How to remove third row seats in 2001 Mitsubishi Chariot

same way as you slight the front seat forwart.lift the bar up underneed the seats
0helpful
1answer

Why is there no power to third row seat?

Power 3RD Row Seat Problems and Tranny Shutter - Ford Truck ...

www.ford-trucks.com > ... > Expedition & Navigator
Mar 27, 2014 - Expedition & Navigator 1997 - 2002 and 2003 - 2006 Ford Expedition andLincoln Navigator SPONSORED BY: ... First the 3RD row seats won't fold down, noclicking, no sounds, nothing. I the fuses are good and there is power at the fuse box, but no power at the motors or switches. Based on continuity ...

3rd row powerfold seat stuck down - Ford Truck Enthusiasts Forums

www.ford-trucks.com > ... > 2007 - 2014 Expedition & Navigator
Mar 14, 2010 - 3rd row powerfold seat stuck down 2007 - 2014 Expedition ... 2010, 2011, 2012, 2013 and 2014 Ford Expedition and Lincoln Navigator ... I also tried lifting the seat while my wife was pushing the button to raise it, to no effect. There is defnitelypower going to the motor but it just isn't ... Join Date: Feb 2005.

No power to third row seat on 2005 lincoln navigator - Fixya

www.fixya.com/cars/t12295627-no_power_third_row_seat_2005_lincoln
Apr 4, 2012 - no power to third row seat on 2005 lincoln navigator third row seat is ... U will have to replace the entire power seat transmission, there is no ...

Lincoln Navigator Review - Edmunds.com



2helpful
1answer

Just bought a 2002 Mountaineer w/keyless entry. The problem is no one at the dealer knows the code. How can I reset it?

In the 2002 Mercury Mountaineer, especially with the 3rd row seat, remove the trim panels at the rear of the back door and at the tailgate on the passenger side. You will see two panels where the wall seat belt is located, remove the top panel first and then pull the lower panel out.Then pull the lower trim panel forward CAREFULLY. Towards the front (near the door opening) you will see a small black box (says Security Unit) On it in fairly small print will be the 5 digit code.
[ONE set of FIVE numbers and that is your CODE number.]
45helpful
1answer

Power Fold Rear 3rd Row Seat on 2006 Ford Explorer will not raise. I can hear motor trying to raise seat. The gear does not appear to be turning. Motor hums like it is in a bind. What needs replacing?

Power Fold Rear 3rd Row Seat on 2006 Ford Explorer will not raise. I can hear motor trying to raise seat. The gear does not appear to be turning. Motor hums like it is in a bind. What needs replacing?
9helpful
2answers

I want to make my 1999 Mercury Villager Sport into a cargo loader, with just the front seats kept and the rest of the back empty. How do I remove the other 3 seats? So far, I can't get any of them to budge...

the middle seats come out easily. There are 2 handles you have to lift up on each of the bucket seats, they are in the front of the seat down by the seat tracks. After you lift them, tilt the seat upward in the front and rotate them backward. Then lift out of the hooks. Each seat is held down by 4 hoks.

The 3rd row seat is not designed to come out xcept by a technician. It does slide forward all the way up to the front seat. It has a sliding seat track.
First, lift the T handle under the seat cushion on the left front side of the seat. This will allow you to lift the seat bottom up all the way to lcok in the full up position.
Then, lift the lever on the same side of the seat and slide the seat forward. It will stop in 4 places.
Rear -Rear
6 inches forward of that.
another two ft to the second row seating position
full frward against the front seats.

Pleae rate as fixya if this helps.

c4253aa.gif Seat —Third Row Bench Removal
sxv~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Removal of the third row bench seat requires more than one technician.
  1. Remove the second row seats. For additional information, refer to Seat—Second Row .
  1. Remove the floor mats.
  1. Lock the seat cushion in the upright position.
    1. Lift the handle to release the cushion.
    1. Lock the seat cushion in the upright position.
0235766.gif
  1. Move the third row bench seat to the second row position.
    • Lift the seat track release handle.
  1. Remove the two bolt covers.
  1. Remove the two seat track front bolts.
  1. Remove the four seat track rear bolts.
    1. Position the rear seat cushion floor cover aside.
    1. Remove the four seat track rear bolts.
  1. Remove the third row bench seat.
Not finding what you are looking for?

754 views

Ask a Question

Usually answered in minutes!

Top Mercury Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...