The new quick disconnect does not seem to just slip on the heater core nipple, the old one came off pretty easy.
SOURCE: the nipple on the heater core that connact the
Unfortunately the heater core must be replaced because the nipple is soldered to the heater core and access to the core for resoldering is not possible unless the heater core is remove and so if you go to that kind of trouble you should just replace the core with a new one rather than doing the repair and risking a future leak after reinstalling.
Testimonial: "yes it was helpful . but have other question.what is the white plactic that is covering the pipe that come out of the heater core"
SOURCE: 1999 chev 2500 heater core
not so quick hu--push squeeze & turn yor may have to replace when old its difficult
SOURCE: cannot remove the quick disconnect for my heater
You will have to have a special tool made by Kent Moore to remove the connectors. The number of the tool is J-43181. If you do a GOOGLE search, you will see the tool you need. Regards.
SOURCE: the heater hose on my 1999 siverado broke off at
There is a special tool to remove fitting. Don't get too rough...you will damage heater core. This will turn a small problem into a big one!
SOURCE: I have no heat on
LOOKING AT HEATER CORE TOP HOSE COOLANT FLOW IN BACK OUT THROUGH THE BOTTOM HEATER CORE HOSE CHECK WATER PUMP BYPASS HOSE SEE IF IT GETS HOT.IF NOT COULD BE BLOCKAGE AT BYPASS HOSE FROM WATER PUMP OR WATER COULD BE FAULTY GETTING TOO WEAK PUMP COOLANT THROUGH SYSTEM.IF COOLANT GETTING HOT GOING TO HEATER CORE THE HEATER CORE AND COOLANT SYSTEM NEED FLUSHING OUT.
184 views
Usually answered in minutes!
×