Cars & Trucks Logo

Related Topics:

A
Anonymous Posted on Jul 02, 2012

2006 gmc yukon bose amp locations

Where is the bose amp located? i got an atermarket radio that sounded great, but the battery ran down and everything reset. now the base is pretty much gone except in the front. is there more than 1 bose amp? one for the front, and one for the back or something?

5 Related Answers

Anonymous

  • 1 Answer
  • Posted on Oct 20, 2008

SOURCE: location of fuse box/panel for 2004 yukon denali xl

There are 2 fuse panels in the Denali.
One is a panel on the drivers side, its on the dash but facing the door.

The ohter is under the dash and above the pedals, this one is much tougher to access.

Your Owner's Manual should tell you where the fuses are that you need to access.

Ad

Jason Morris

  • 362 Answers
  • Posted on Feb 10, 2009

SOURCE: Fuse Box Location 2006 GMC Envoy

Under the rear seat, drivers side.
Black box you will need to remove the cover.
Lone99star
Please rate this solution.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/jason_77a19afa8d604dee

Anonymous

  • 1 Answer
  • Posted on May 29, 2009

SOURCE: battery ran down.now radio/clock don't work. flashes Error.can this be reset?

try taking the radio out and looking on the top for the parts number. call Honda and tell them what is going on and they will give you a 4 digit code that will reset the radio. i had the same problem with my 05 civic, did that and it worked for me.
good luck

Jonah Oneal

  • 14092 Answers
  • Posted on Jul 20, 2009

SOURCE: i need to recharge my ac in a 2002 gmc yukon where

your charge port is under hood on the line going to accumulator.look for black or blue cap with the letter L on it.WARNING BESURE TO WEAR SAFETY GLASSES.

john h

  • 29494 Answers
  • Posted on Nov 26, 2009

SOURCE: gmc yukon has the abs & parking brake light

you have to fix the problem with ur brakes- first check the wiring ,connectors and connection clips to the abs sensors and modulator if looks ok than have truck scanned some auto stores such as auto zone / advanced auto do it for free the code will give u a start point towards fixing ur problem--visual inspection of brakes doesnt always show problem

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

NO sound in my 2006 gmc envoy

did you install a new radio,if so you need to re wire all the speakers,the amp is under the console assuming you had a bose,but same for other radio's. take a speaker and check from the radio to see if it works,if so re wire the speakers. good luck.
1helpful
1answer

2006 Yukon Denali XL the radio stays on as well as the battery symbol on the dash and the dash lights and the heated seats buttons also light up with the car off and locked keys out of ignition

Yes that's normal. it should go off as soon as you open the door though. if it doesn't then they will go off when timer expires (normally about 90 seconds) after you leave the car.
4helpful
2answers

Where is the cam shaft location sensor located on a 2005 gmc yukon

camshaft sensor located above crankshaft pulley, the camshaft sensor mounted on the front timing cover above the crankshaft pulley.
0helpful
2answers

My radio in my Yukon turns on but no sound comes out of the speakers. i installed an after market cd player and i still cant get any sound on the speakers

It sounds like the amp is not functioning on the radio. If you install and after market cd player the radio still won't play because it's the same amp.

Now, if you would change the radio and it still won't play, it sound like it would be the wiring to the speakers. Speakers usually don't burn out, but anything is possible.

I hope this helped.
2helpful
1answer

I need an audio wiring schematic for 2002 yukon, or lead me to where i can find it. Thanks

2002 GMC Yukon Car Stereo Wiring Guide
Car Radio Battery Constant 12v+ Wire: Orange
Car Radio Accessory Switched 12v+ Wire: Yellow
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Brown
Car Stereo Dimmer Wire: Gray
Car Stereo Antenna Trigger Wire: N/A
Car Stereo Amp Trigger Wire: N/A
Car Stereo Amplifier Location: N/A
Car Audio Front Speakers Size: N/A
Car Audio Front Speakers Location: N/A
Left Front Speaker Positive Wire (+): Tan
Left Front Speaker Negative Wire (-): Gray
Right Front Speaker Positive Wire (+): Light Green
Right Front Speaker Negative Wire (-): Dark Green
Car Audio Rear Speakers Size: N/A
Car Audio Rear Speakers Location: N/A
Left Rear Speaker Positive Wire (+): Brown
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Dark Blue
Right Rear Speaker Negative Wire (-): Light Blue

rate pls
0helpful
1answer

No sound from Bose system in 2003 Yukon XL

im sorry but i dont think you are going to able to find that chip.i think your best choise would to go the the junk yard for a new amp.or if you feel lucky try conntacting bose.
0helpful
1answer

I have a 2006 Yukon xl Denali with the Bose radio/ Navigation and separate 6 disc cd changer. The am/fm radio works fine, but when using XM, the channels get stuck and have to be turned manually.

generally it would just need to be reset... unhook the battery for about ten minutes and hook it back up. make sure you have the unlock code for the radio FIRST and you know how to enter it.

Robert

1helpful
2answers

99 yukon radio problem

If you have the BOSE system, you will have to check the power amplifier which is, unfortunately, buried under the center console. You can only get to it by removing the entire console and turning it upside down. It is located directly under the the stowage area. There are 4 torx head screws that secure it and 2 connectors toward the front. My guess would be that there is a fault in it or possibly a shorted speaker wire somewhere. To remove the console, you need to remove the top (screws located under the cup holder areas) and slide it about 1.5 inches rearward. the console also has 2 large cables that plug into the console which need to be disconnected and un-clipped from the restraint clips. Once you get to the power amp, you can open it to look for obvious signs of damage (if you are electronically inclined) or get one from a bone yard to use as a test. Good luck!
Not finding what you are looking for?

243 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29492 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...