1999 Mercury Sable Keyless entry wont work

SOURCE: program remote keyless entry

1) Turn key from OFF to ON eight times within 10 seconds ending in the ON position.

2) After doors lock then unlock, press any button on the
remote being programmed.

3) The doors should lock/unlock to confirm programming.

4) Turn key to OFF and door locks should cycle one last time.

SOURCE: keyless door pads

most dealerships use the zip code for your area to open all keyless entry cars if you bought it from a dealer--if you did buy it new you can ask the dealer to run an oasis on the truck & maybe get the code that way

SOURCE: 2003 Mercury Sable, Driver's side remote keyless entry keypad not functioning

Doubt its a fuse. Most likely the key pad has failed and needs to be replaced. On the bright side this is a good problem to have and you have a very reliable car.

SOURCE: can i find my original key less door entry code using my VIN numb

for safety reasons, only a dealer can get your key code from Ford and make you a key. You will need proof of ownership and your VIN number and ID. 1-800-241-3673.
You can try calling Ford Roadside Assistance. They may be abe to help.

Sometimes, you can take a long, thin screwdriver and lift up the door handle. Slide the screwdriver in the slot under the handle. Move around till you see the lock button move and try to pry it up. Also, local police might help with a slim jim.

Marvin

• 85242 Answers
• Posted on Jun 05, 2009

SOURCE: codes for keyless entry on a 2001 merc sable

the numbers are on the keyless module in the trunk, it is a paper tag